4-36

Operation with a Full Function Handset

4.4.16.11Using the DSC Log

The RAY215 maintains 3 separate logs for storing information about sent and received DSC calls. The logs are divided by type:

Individual, All Ships, and Group Calls

Distress Calls

Relay Distress Calls

Each log can store up to 10 calls. If more than ten DSC calls of a particular type are logged, the oldest one is deleted as the new one comes in.

To view a log:

1.Press FUNC followed by LOG/CLR to enter DSC Log mode. LoG appears on the seven segment display and the log type appears on the dot matrix display.

2.Press the SQ UP/DOWN keys to scroll through the available logs: DISTR for Distress calls

I/A/G for Individual/All Ships/and Group Calls RELAY for Relay Distress Calls

3.When the desired log appears, press ENT to accept. The log number appears next to the log type, beginning with 0, the latest entry.

4.Press the SQ UP/DOWN keys to scroll through the entry numbers 0-9 for the particular log. After one second of displaying the log entry number, the log data for that entry begins scrolling across the dot matrix display, containing the following information:

Type of call

MMSI number

Nature of the call (Routine, Safety, or Urgency), if applicable

CLR-EXIT

ENT-DELETE

If no call exists for a particular log entry number, the data appears as all dashes (-).

5.Press the CLR key to delete the log entry from memory or press CLR to exit DSC Log mode without making changes. If an entry is deleted, the next older entry assumes the deleted entry’s number. For example, if log 1 is deleted, log 2 becomes log 1, log 3 becomes log 2, and so on.

Page 87
Image 87
Raymarine Ray215 manual Using the DSC Log, To view a log