Operation with a Fist Microphone |
The lower bar graph on the LCD displays the squelch level.
"SCAN/ MEM Key
This key starts or stops All Scan and Memory Scan Modes. The key also places favorite channels into the radio's memory for quick selection.
Pressing and holding SCAN/MEM for 3 seconds stores into memory the currently displayed channel and illuminates the MEM indicator on the LCD. If the current channel has already been stored, pressing SCAN/MEM removes the channel from memory and extinguishes the MEM indicator.
Pressing and releasing SCAN/MEM when no channels have been entered into memory initiates a scan of all available channels. The SCAN indicator illuminates on the LCD.
When at least one channel has been programmed into memory, pressing and releasing SCAN/MEM causes the MEM and SCAN indicators to flash for 3 seconds. If the key is pressed again while these indicators are flashing, the radio enters All Scan mode. However, if the 3 seconds expire before pressing the key a second time, the radio initiates a scan of only those channels programmed into memory.
Pressing the SCAN/MEM key during All Scan or Memory Scan terminates the scan.
#WX/INT Key
Pressing and releasing WX/INT switches between the Weather channel and the last used marine channel. Pressing and releasing WX/INT while in the Dual Watch mode places the unit in
Pressing and holding WX/INT for 2 seconds switches between the US, Canadian, and International frequency groups. While in the International Frequency mode, the INT indicator illuminates on the LCD. While in the Canadian mode, the CAN indicator illuminates. There is no indicator for US mode.
$MON/ 1/25 Key
Pressing and releasing MON/1/25 initiates the
