Raymarine Ray215 manual Modifying the List of Shore Stations, Adding Shore Stations to the List

4-46 Operation with a Full Function Handset

Modifying the List of Shore Stations

In this operation, a shore (coast) station is registered (added) to or deleted from the phonebook list.

1.When SHORE is displayed, press the ENT key. SHO appears on the 7- segment display, while on the dot matrix display shows ENTRY.

2.The ENTRY selection is used to register (add) an item to the list. Press the ENT key to accept.

The list can hold a maximum of 20 entries. If a list is already full or if the list becomes full during this process, the indicator PHNBOOK IS FULL is displayed.

3.To delete an item from the list, use the SQ UP/DOWN key to select DELETE and press the ENT key. If no station has yet been registered, the message PHNBOOK IS EMPTY is displayed.

ENT

Note: Pressing and holding the CLR key for 3 seconds during either ENTRY or DELETE returns operation to the mode before the Menu operation began.

Adding Shore Stations to the List

To add to the phonebook list for shore stations, input the MMSI number and nickname of the station.

1.To enter the MMSI number, press the corresponding numeric keys (0 through 9). The currently selected location is indicated by a flashing “–” character. Pressing a numeric key enters that value then advances to the next digit's place. To go back by 1 digit, press the CLR key.

2.To enter the nickname, use the numeric keys (0 through 9) to input their associated alpha or numeric value (refer to section 4.2 Controls and LCD Display). The currently selected location is indicated by a flashing “–” character. After inputting the desired letter or numeral, press the ENT key to submit the entry and proceed to the next place. To go back by 1 digit, press the CLR key.