Operation with a Full Function Handset

4-7

!PTT (Press-to-Talk) key

Pressing this key during normal operation places the radio in Transmit mode and displays the TX indicator in the LCD. When the key is pressed in various function modes, the assigned operation is initiated.

Note: After 5 minutes of continuously holding the PTT key, the radio will automatically stop transmitting. To begin transmitting again, release the PTT and depress again.

"DISTRESS key

This key is located under the small door labeled DISTRESS on the back of the handset. Pressing and holding this key for 5 seconds selects Distress Signal Call mode. Subsequent operations are described in section 4.4.16.8.

4.2.2LCD Display

The following describes the functional characters on the RAY215 Handset's LCD.

Figure 4-3 LCD Display Layout

￿NMEA indicator

Displayed when the radio receives valid NMEA position data. If the data is invalid or no data is received for a period of time, the indicator disappears.

FUNC indicator

Displayed when the FUNC key is pressed. Disappears when another key is pressed, or after no other key is pressed for a period of time.

!WX indicator

Displayed while in Weather Channel mode.

Page 58
Image 58
Raymarine Ray215 manual PTT Press-to-Talk key, Distress key, Func indicator