Safety Instructions
Setting the controls.
Using the Touch Control.
Touch the pad lightly with the flat part | A "beep" sound can be heard with each |
of your fingertip. Touch the center of the | touch to any pad. |
pad to ensure the cooktop response. |
|
Care and Cleaning Operating Instructions
Operating the Cooking Elements
Each of the cooking elements have separate ON/OFF pads and LED display.
Be sure to use cookware that meets the minimum pan size requirements.
To turn on a cooking element:
Place a pan with food onto the induction element. The pan size should match the indicator ring.
Touch the ON/OFF pad. “5” will flash in the display.
Touch the (+) or
NOTE: You can also touch and hold the pad to scroll quickly to the desired setting.
The induction circuit detects the pan and allows the element to be activated. Both the element ON indicator light and the cooktop HOT SURFACE light will illuminate. If no power level is selected within 10 seconds, the zone will be deactivated.
To turn the control to OFF, touch the ON/OFF pad. The induction element will be turned off and the display will be blank.
With an element control ON:
If a pan is removed or moved to
If the pan is placed back on the zone within 30 seconds, the flashing will stop and cooking will resume.
Troubleshooting Tips
1/2
The power level with a fraction indicates the additional
Power Level Settings
The cooktop offers 19 power levels, including a Boost setting. Power levels range from “L” to 9 in precise
Power Level “L”, the lowest setting, is recommended for “Keep Warm.”
The power level increases
Power level 9 is the highest normal power setting.
Consumer Support
Flashing “F” in the Display
If a pan is removed or moved
If the pan is returned to the surface element within 30 seconds, the flashing “F” will disappear and cooking will resume.
10