JVC KD-SH1000 manual Troubleshooting, Symptoms Remedies/Causes

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

	Symptoms	Remedies/Causes
	• Sound cannot be heard from the speakers.	• Adjust the volume to the optimum level.
		• Check the cords and connections.
General	• The unit does not work at all.	Reset the unit (see page 2).
	• “Connect Error” appears on the display.	Remove the control panel, wipe the connector, then attach
		it again (see pages 4 and 31).
	• “Push Reset” appears on the display and the	Reset the unit (see page 2). If this does not work, check the
	control panel movement is freezed.	installation.
FM/AM	• SSM automatic presetting does not work.	Store stations manually.
	• Static noise while listening to the radio.	Connect the antenna firmly.
	• Disc cannot be played back.	Insert the disc correctly.
	• CD-R/CD-RW cannot be played back.	• Insert a finalized CD-R/CD-RW.

•Tracks on the CD-R/CD-RW cannot be skipped. • Finalize the CD-R/CD-RW with the component which you used for recording.

playbackDisc
	•	Disc cannot be recognized (“No Disc,” “Loading	Eject the disc forcibly (see page 2).
	• Disc can be neither played back nor ejected.		• Unlock the disc (see page 14).
			• Eject the disc forcibly (see page 2).
		Error,” or “Eject Error” appears).
	• Disc sound is sometimes interrupted.		• Stop playback while driving on rough roads.
			• Change the disc.
			• Check the cords and connections.
	• Disc cannot be played back.		• Use a disc with MP3/WMA tracks recorded in the format
playback			compliant with ISO 9660 Level 1, Level 2, Romeo, or
			• Add the extension code <.mp3> or <.wma> to the file
MP3/WMA			Joliet.
			names.
	•	Noise is generated.	Skip to another track or change the disc. (Do not add the
			extension code <.mp3> or <.wma> to non-MP3 or WMA
			tracks.)

38