JVC KD-SH1000 manual More about this unit

		To keep discs clean
ENGLISH	A dirty disc may not play correctly.
	• Do not use any solvent (for example,
	If a disc does become dirty, wipe it
	with a soft cloth in a straight line
	from center to edge.

conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc.

To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

How to handle SD card

SD cards are precision products. DO NOT impact, bend, drop, or wet them.

Do not use the following discs:

Warped disc

Sticker Sticker residue

Stick-on label

More about this unit

Basic operations

Turning on the power

•By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts.

Turning off the power

•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

Tuner operations

Storing stations in memory

•During SSM search...

–All previously stored stations are erased and stations are stored newly.

–Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

–When SSM is over, the station stored in No. 1 will be automatically tuned in.

•When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.

FM RDS operations

•Network-Tracking Reception requires two types of RDS signals—PI (Programme Identification) and AF (Alternative Frequency) to work correctly. Without receiving these data correctly, Network- Tracking Reception will not operate correctly.

•If a Traffic Announcement is received by TA Standby Reception, the volume level automatically changes to the preset level (TA VOL) if the current level is lower than the preset level.

•When Alternative Frequency Reception is activated (with AF selected), Network- Tracking Reception is also activated automatically. On the other hand, Network- Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception. (See page 24.)

34