JVC KD-SH1000 manual Used for recording

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

	Symptoms	Remedies/Causes
	• Sound cannot be heard from the speakers.	• Adjust the volume to the optimum level.
		• Check the cords and connections.
General	• The unit does not work at all.	Reset the unit (see page 2).
	• “Connect Error” appears on the display.	Remove the control panel, wipe the connector, then attach
		it again (see pages 4 and 26).
	• “Push Reset” appears on the display and the	Reset the unit (see page 2). If this does not work, check the
	control panel movement is freezed.	installation.
FM/AM	• SSM automatic presetting does not work.	Store stations manually.
	• Static noise while listening to the radio.	Connect the antenna firmly.
	• Disc cannot be played back.	Insert the disc correctly.
	• CD-R/CD-RW cannot be played back.	• Insert a finalized CD-R/CD-RW.
	• Tracks on the CD-R/CD-RW cannot be skipped.	• Finalize the CD-R/CD-RW with the component which you
playbackDisc		used for recording.
	• Disc cannot be recognized (“No Disc,” “Loading	Eject the disc forcibly (see page 2).
	• Disc can be neither played back nor ejected.	• Unlock the disc (see page 14).
		• Eject the disc forcibly (see page 2).
	Error,” or “Eject Error” appears).
	• Disc sound is sometimes interrupted.	• Stop playback while driving on rough roads.
		• Change the disc.
		• Check the cords and connections.

32