JVC KD-SH1000 manual Changing the source, Ejecting a disc, Selecting the DSP modes-DSP

Models: KD-SH1000

1 282
Download 282 pages 42.58 Kb
Page 35
Image 35

Changing the source

If you change the source, playback also stops. Next time you select the same source again, playback starts from where it has been stopped previously.

Ejecting a disc

If the ejected disc is not removed within

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time.)

Sound adjustments

Selecting the DSP modes—DSP

Effectiveness of “V.Cancel” depends on the recording condition of the sources:

Monaural sources such as AM and monaural FM broadcasting programs.

Multiplex sound sources.

Sources recorded with duets, strong echo, a chorus, or only a few instruments.

When “4ch” is selected, rear speakers are used only to reproduce reflections and reverberations in order to create a being-there feeling in your car compartment.

If fader or balance has been set close to its extreme, appropriate effect may not be obtained.

You cannot adjust the effect level and speaker number when “Defeat” is selected with crossover network activated.

Storing your own sound modes

If you do not want to store your current adjustment, but only to apply the adjustment to the current playback source, press MENU to go back to the operation screen of the current source. Adjustment you made remains effective until you select a sound mode.

Setting the sound modes—SEL

If you are using a two-speaker system, set the fader level to the center.

Subwoofer out setting takes effect only when a subwoofer is connected.

You cannot change the input level— “VolAdjust” of the FM stations. If the source is FM, “Fix” will appear when you try to adjust it.

General settings — PSM

“Auto Dimmer” may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, change the “Dimmer” setting to any one other than “Auto.”

If you change the “Amp Gain” setting from “High PWR” to “Low PWR” while the volume level is set higher than “Volume 30,” the unit automatically changes the volume level to “Volume 30.”

ENGLISH

35

Page 35
Image 35
JVC KD-SH1000 manual Changing the source, Ejecting a disc, Selecting the DSP modes-DSP, Storing your own sound modes