PROBLEM | POSSIBLE CAUSE | REMEDY |
Unit does not operate | Unit is unplugged | Securely plug receptacle into |
|
| the power outlet |
| Drain bucket is full | Empty water bucket |
| Water bucket not installed | Completely insert water bucket |
| correctly |
|
| Air exhaust is clogged | Remove obstruction from |
|
| exhaust hose |
| Timer is on | Cancel the timer |
Unit does not cool room | There is a heating source in the | Turn down or off the other |
| room | heating source |
| Temperature setting is too high | Lower temperature setting |
| Air filter is dirty | Clean or replace the air filter |
| Air exhaust is not installed | Check the exhaust duct to |
| correctly | make sure that the hot exhaust |
|
| air is being vented out of the |
|
| room |
| Room is too big or too much | This unit provides spot cooling |
| ambient sunlight is reaching in | or cooling for a room no larger |
|
| than 300 square feet with |
|
| standard ceiling height |
| There is frost on the evaporator | The unit will defrost |
|
| automatically and return to |
|
| operation afterwards |
In dehumidifying mode, no | There is frost on the evaporator | The unit will defrost |
cool air coming out |
| automatically and will return to |
|
| operation afterwards |
“Water Full” indicator is | The water bucket is full | Empty the water bucket |
blinking | The water bucket is not | Completely insert the water |
| installed correctly | bucket |
Noise or vibration | Surface is not level | Place unit on a level surface |
|
| and away from obstructions |
Water is leaking from unit | Surface is not level | Place unit on a level surface |
| Drainage plug is loose | Make drain tube is properly |
|
| secured and plugged |
TECHNICAL SPECIFICATIONS
17
