Channel Balance, Fader, Cut & Solo

Note that it is possible to globally switch the FX Sends independently for the X-Panda to source the signal pre fader by engaging the “PRE” switch for either of the two FX Send busses on the last X-Panda Stereo Channel.

At the end of the Stereo Channel there is a Balance control. Note that this is entirely different to the Pan control on the Mono channels. Simply, it controls the channels respective Left/Right Level feed to the Stereo Mix Bus. If you are unfamiliar with this type of control it may be worth playing some stereo material into the channel and experimenting with the control to perhaps give you an idea of it creative potential.

In addition to the usual Solo and Cut switches along with a long throw Channel fader, all of which function as they do on the Mono channels.

Page 11

Image 11

Solid State Logic 82BXEM01A manual Channel Balance, Fader, Cut & Solo

Contents

Panda User’s Guide Page Contents Page Expand your studio with an SSL Green 24 dBu Yellow = DBu Red +16 dBu Inputs Channel Input CH IP, Alternate Input ALTGreen 24 dBu Yellow = +4 dBu Red +21 dBu FX Sends 1&2 and Stereo Returns ST RET Outputs Direct Channel Outs CH OP, Post FaderStereo Cue Post Fader, ALT source Channel Pan, Fader Cut & Solo Green = 24 dBu Yellow = DBu Red = +16 dBu Stereo Inputs Channel Input CH IPGreen = 24 dBu Yellow = +4 dBu Red = +21 dBu FX Sends 1&2 Stereo Outputs Direct Channel Outs CH OP, Post FaderStereo Cue Send Channel Balance, Fader, Cut & Solo Cascading X-Panda and X-Desk Rear DIP Switch Options Use with another analogue summing system Using X-Panda with an X-Rack Summing SystemMix Bus Link Using X-Panda with other audio equipment Use with another audio mixing console Insert Send 9-16 Sub 25 way female Racking your X-PandaRear Panel Connections Line in 9-16 Sub 25 way female ALT in 9-16 Sub 25 way female MIX Bus Output Stereo Channels Insert ReturnStereo Channels Direct Output CH OP Provides AFL Output Begbroke, Oxford, England OX5 1RU +44 01865