Channel Pan, Fader Cut & Solo

At the base of the X-Panda Mono channel strip you will find traditional analogue desk functions.

The channel stereo “PAN” control, which controls the channels

Left/Right positioning on the Stereo Mix bus.

The analogue signal level FADER, for feeding the Stereo Mix Bus or controlling the CH OP (Direct Channel Output) level.

Above the Fader you will find two switches:

The “SOLO” button, which mutes all other channels and provides an AFL monitoring signal, and finally the “CUT” button which immediately mutes the channel’s output.

Page 8

Image 8

Solid State Logic 82BXEM01A manual Channel Pan, Fader Cut & Solo

Contents

Panda User’s Guide Page Contents Page Expand your studio with an SSL Green 24 dBu Yellow = DBu Red +16 dBu Inputs Channel Input CH IP, Alternate Input ALTGreen 24 dBu Yellow = +4 dBu Red +21 dBu FX Sends 1&2 and Stereo Returns ST RET Outputs Direct Channel Outs CH OP, Post FaderStereo Cue Post Fader, ALT source Channel Pan, Fader Cut & Solo Green = 24 dBu Yellow = DBu Red = +16 dBu Stereo Inputs Channel Input CH IPGreen = 24 dBu Yellow = +4 dBu Red = +21 dBu FX Sends 1&2 Stereo Outputs Direct Channel Outs CH OP, Post FaderStereo Cue Send Channel Balance, Fader, Cut & Solo Rear DIP Switch Options Cascading X-Panda and X-Desk Using X-Panda with an X-Rack Summing System Mix Bus Link Using X-Panda with other audio equipmentUse with another audio mixing console Use with another analogue summing system Racking your X-Panda Rear Panel Connections Line in 9-16 Sub 25 way femaleALT in 9-16 Sub 25 way female Insert Send 9-16 Sub 25 way female Stereo Channels Insert Return Stereo Channels Direct Output CH OPProvides AFL Output MIX Bus Output Begbroke, Oxford, England OX5 1RU +44 01865