Appendix E Physical specification | Solid State Logic 82S6XL010D

Appendix

Appendix E – Physical specification *

Depth:	325mm/12.8 inches not including heatsink
	365mm/14.3 inches including heatsink
	400mm/15.75 inches including connectors
Height:	89mm/3.5 inches (2 RU)
Width:	480mm/19 inches
Weight:	5kg/11 pounds
Power:	55 Watts/67 VA
Boxed size:	520mm x 520mm x 182mm (20.5" x 20.5" x 7.2")
Boxed weight:	7.3kg (16 pounds)

* All weights and dimensions are approximate

Appendix F – Environmental Specification

Temperature	Operating:	5 to 30 Deg. C
	Non-operating:	–20 to 50 Deg. C
	Max. Gradient:	15 Deg. C/Hour
Relative Humidity	Operating:	20 to 80 %
	Non-operating:	5 to 90 %
	Max. wet bulb:	29 Deg. C (non-condensing)
Vibration	Operating:	< 0.2 G (3 - 100Hz.)
	Non-operating, power off:	< 0.4 G (3 - 100Hz.)
Shock	Operating:	< 2 G (10mSec. Max.)
	Non-operating:	< 10 G (10mSec. Max.)
Altitude	Operating:	0 to 3000m (above sea level)
	Non-operating:	0 to 12000m

Page 13

Image 17

Solid State Logic 82S6XL010D owner manual Appendix E Physical specification, Appendix F Environmental Specification

Contents

Multichannel Compressor Page Solid State Logic Solid State Logic Contents XLogic Multichannel Compressor rear XLogic Multichannel Compressor front Warranty Repairs WarrantyOut of Warranty Repairs Introduction Electrical Safety Warning Safety considerationsInstallation Definitions Mains Isolation and Over-Current Protection Mains Supply and PhasesCE Certification FCC Certification Voltage Selection InstallationMounting Connection Compressor Controls Side Chain Adjust SectionOperation Fader Section Mode Section Appendix a Internal links and fuses Appendix B Connector Details Appendix C Performance Specification Appendix D Calibration Information Side Chain Gain AdjustmentDC Calibration Side Chain Trim Calibration Input Measure Adjust VCA Gain AdjustInput Adjust Distortion Null Appendix F Environmental Specification Appendix E Physical specification