Duende User Guide
BYPASS ALL: Engaging this button will bypass all channel processing whilst still routing the signal through Duende. This avoids the time shift which occurs when a ‘hard’ bypass is done using the default DAW control, allowing for easier A/B comparison between processed and unprocessed signals.
6.6 Advanced Signal Routing Options
Channel Processing Order
There are two switches that control the order of the signal processing elements. These are the ‘Filters to INPUT’ switch in the Filter Section and the ‘Dynamics PRE EQ’ in the Dynamics Section.
The table below shows the effect of these:
Switch 1 | Switch 2 | Processing |
|
|
| Order |
|
|
| Equaliser | Filters |
Filters to |
|
|
|
INPUT |
| Filters | Equaliser |
Dynamics PRE |
|
|
|
EQ |
| Dynamics | Equaliser |
Filters to | Dynamics PRE |
|
|
INPUT | EQ | Filters | Dynamics |
Dynamics
Dynamics
Filters
Equaliser
Side Chain Processing Order
The EQ and filter sections can be assigned to the Dynamics sidechain using the DYN S/CH switches in the respective sections. The table below shows the sidechain source and processing for the various combinations of these:
Switch 1
EQ to Dyn
S/C
Filters to DYN S/C
EQ to Dyn
S/C
Switch 2
Filters to Dyn S/C
SC Source
Dynamics
Input
Dynamics
Input
Dynamics
Input
Dynamics
Input
Sidechain Processing order
Equaliser
Filters
Equaliser | Filters |