SONANCE THINLINE™ TL and SSTR
PAINTING THE SPEAKERS AND GRILLES
You can paint the speakers and grilles before | installing them, which will | eliminate | the “paint | scar” that can be left on the | ceiling if the speaker ever needs | |||
to be removed for service. You can also paint | the speakers after installation, but | before the | grilles | are attached. All Sonance ThinLine | speakers come from | |||
the factory fitted with a plastic ‘paint plug’ that protects the speaker drivers while the mounting flange is being painted. |
|
|
| |||||
Sonance always suggests painting the grille separately from the speaker. | Before painting, carefully | remove the | cloth. It | is | held in place with a | |||
light tacking glue that makes it easy to remove. |
|
|
|
|
|
|
| |
Spray the grilles with thinned paint (5 parts thinner to 1 part paint), | being careful not to | plug | the holes. Too heavy a | coat of | paint on the grille will | |||
adversely affect the sound of the speaker. |
|
|
|
|
|
|
|
|
Once the grilles and flange are painted and dry, replace the
SPEAKER ADJUSTMENTS
Pivoting Tweeter
ThinLine TL623R and TL622R have a pivoting tweeter. This lets you direct sound toward or away from the listening area, depending on how the speakers are being used:
• If you’re using the speakers in stereo or as the front left/center/right speakers in a home theater, pivot the tweeter directly towards the listening area. This will help the sound from the speakers blend into a solid soundstage even if the speakers are widely separated.
•If you’re using the speakers as surround channel speakers in a home theater, you can create a more diffuse, spacious surround effect by pivoting the tweeters towards a wall or window, away from the listeners.
To Pivot the Tweeter:
Apply light pressure to the plastic ring around the outside edge of the tweeter dome, as shown in Figure 9. Do not touch or apply pressure to the tweeter dome.
Tweeter Level Control
The ThinLine TL623R and TL623SSTR have a tweeter level control switch (see Figure 10) that lets you boost or cut the tweet- er’s level by 3dB. This allows you to adjust the speaker’s brightness to better match your listening room or personal taste.
Once you have installed the speakers, listen to a variety of music that you are familiar with. If the music all tends to sound too bright or dull, use the Tweeter Level Control to compensate. If some recordings sound dull and some sound bright the speaker is accurately reproducing differences in the recordings, and you should leave the control in the middle (0dB) position.
F i g u r e 9 :
P i v o t i n g t h e T w e e t e r
Tweeter
Level Control
F i g u r e 1 0 :
T w e e t e r L e v e l
C o n t r o l
9
