Page 12 Using the Host Configuration Tool
Using the Host Configuration Tool
The Host Configuration Tool is a wizard that takes you through
several basic steps to get your SonicWALL UMA EM5000
configured for your network.
The wizard starts automatically after you log in for the first time
and change the admin password. You can cancel the wizard at
this time, which leaves the default configuration on the
appliance and prevents the wizard from automatically starting
again.
Note: If you log out of the appliance management interface
without actually cancelling the wizard, it will start
automatically on your next login.
You can manually start the wizard at any time by
clicking the Wizards button at the top-right corner of
the page.
To use the Host Configuration Tool, perform the following steps:
1. If the Host Configuration Tool has started automatically,
skip to step 2. If you are starting the Host Configuration
Tool manually, click the Wizards button in the top right
corner.
2. In the Introduction screen, click Next.