Page 52 Configuring a SonicWALL NSA 2400 for Management
• If the SonicWALL appliance will be managed through
an existing tunnel or is on the same network as the
SonicWALL UMA EM5000 appliance, select Existing
Tunn el. Verify that a tunnel has been created between
the SonicWALL UMA EM5000 subnet and the
appliance.
• If the SonicWALL appliance will be managed using
HTTPS, select HTTPS. If the SonicWALL UMA
EM5000 appliance role includes the GMS Reporting
service, do not select the Send Syslog Messages to
a Distributed GMS Reporting Server checkbox. If
you have a distributed SonicWALL GMS deployment
with a different Reporting server, select the Send
Syslog Messages to a Distributed GMS Reporting
Server checkbox and type the IP address and port of
the Reporting server into the respective fields.
Note: If HTTPS management mode is specified, ensure that
the SonicWALL UMA EM5000 can receive syslog data
from the managed appliance by allowing traffic over
port 514, or a custom port if you specified one, to pass
through the firewall in front of the SonicWALL UMA
EM5000.
8. When you are finished, click OK.