SonicWALLUMA EM5000 Getting Started Guide Page 53
Adding a SonicWALL NSA 2400 to SonicWALL GMS
To add your appliance to SonicWALL GMS, perform the
following steps:
1. Log in to the SonicWALL GMS management interface.
2. Expand the SonicWALL GMS tree and select the group to
which you will add the SonicWALL appliance. Then, right-
click the group and select Add Unit from the pop-up menu.
To add the appliance independently from any group, right-
click an open area in the left pane and select Add Unit.
The Add Unit dialog box appears.
3. Enter a descriptive name for the managed appliance in the
Unit Name field.
4. Enter the managed appliance serial number in the Serial
Number field. The serial number can be found in the
appliance management interface under System > Status.
5. To specify the IP address of the SonicWALL NSA
appliance, select the Specify manually radio button for
Managed Address, and type the IP address into the field.
6. Enter the managed appliance administrator login name in
the Login Name field. The default is admin.
7. Enter the managed appliance administrator password in
the Password field.
8. Select the radio button next to the management mode that
is the same as the mode you selected in the SonicWALL
NSA 2400 management interface in Configuring a
SonicWALL NSA 2400 - page 50: Select Using Existing
Tunnel or LAN, Using Management VPN Tunnel, or
Using HTTPS.
• If you choose Using Existing Tunnel or LAN, the
HTTP port will be populated with the default value, 80.
• If you choose Using Management VPN Tunnel, the
HTTP port will be populated with the default value, 80.
Provide the SA encryption key and SA authentication
key in the SA Encryption Key and SA
Authentication Key fields. These fields must exactly
match the values in the SonicWALL NSA 2400
configuration.
• If you choose Using HTTPS, the HTTPS Port field is
populated with the default value, 443.
9. If a different SonicWALL UMA EM5000 appliance or host
server will be the Agent for managing the SonicWALL NSA
appliance, select the IP address of that system from the
Agent IP Address drop-down list.
10. If your deployment includes a Standby Agent, select its IP
address from the Standby Agent IP drop-down list.
11. To add this SonicWALL NSA appliance to SonicWALL
GMS monitoring, select the Add this unit to Net Monitor
checkbox.
12. Click OK. It may take up to a minute for the data to load.