SonicWALLSSL-VPN 2000 Getting Started Guide Page 15

Connecting the SonicWALL SSL-VPN 2000

Before continuing, reference the diagrams on the following pages to connect the
SonicWALL SSL-VPN 2000 to your network. Refer to the table in “Selecting a
SonicWALL Recommended Deployment Scenario” on page3 to determine the proper
scenario for your network configuration.
“Scenario A: Connecting the SonicWALL SSL-VPN 2000” on page15
“Scenario B: Configuring Your Network Interface” on page16
“Scenario B: Connecting the SonicWALL SSL-VPN 2000” on page17
“Scenario C: Configuring Your Network Interface” on page18
“Scenario C: Connecting the SonicWALL SSL-VPN 2000” on page19
Scenario A: Connecting the SonicWALL SSL-VPN 2000
To connect the SonicWALL SSL-VPN 2000 using Scenario A, perform the following
steps:
1. Connect one end of an Ethernet cable to the OPT, X2, or other unused port on your
existing SonicWALL UTM appliance.
Scenario A: SSL-VPN on a New DMZ
2. Connect the other end of the Ethernet cable to the X0 port on the front of your
SonicWALL SSL-VPN 2000. The X0 Port LED lights up green indicating an active
connection.
Continue to Step
SonicWALL UTM Appliance
DMZ
X1 X0
OPT, X2, etc.
SonicWALL SSL-VPN 2000
X0
Router Switch/
Hub
Remote Users Network Nodes
Internet Zone LAN