Sonos PLAY3US1BLK manual Not all rooms are visible, Check the wiring

SONOS PLAY:3 11

•Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port.

•Temporarily remove any other components that are wired to your network.

•Connect an Ethernet cable from the computer directly to the back of the Sonos component, and then connect another Ethernet cable from the Sonos component directly to one of the LAN ports on your router.

•When you make a change to your network configuration, you may need to power cycle the Sonos component by unplugging the power cord, and then plugging it back in.

•If you are not using a router, you can visit our Web site at http://faq.sonos.com/norouter for more information.

3.Check the wiring

Check the link/activity lights on both the router and the Sonos component. The link lights should be lit solid and the activity lights should be blinking.

•If the link lights are not lit, try connecting to a different port on your router.

•If the link lights still do not light, try connecting a different Ethernet cable.

Not all rooms are visible

You are probably experiencing wireless interference. Change the wireless channel your Sonos system is operating on by following the steps below.

•Using a handheld Sonos controller: From the Settings menu, touch Advanced Settings, and then Wireless Channel. Choose another wireless channel from the list.

•Using the Sonos Controller for PC: Select Settings -> Advanced Settings from the Manage menu. On the General tab, select another wireless channel from the list.

•Using the Sonos Controller for Mac: Select Preferences -> Advanced Settings from the Sonos menu. On the General tab, select another wireless channel from the list.