Setup Pages

Wireless Settings Page

Use the options on the Wireless Settings page (FIG. 54) to configure communication settings for the wireless CF card (802.11g), and read the device number assigned to the panel.

FIG. 54 Wireless Settings page (reads from and assigns values to the WAP)

Features on this page include:

Wireless Settings Page

Back:

Saves all changes and returns to the previous page.

 

 

WiFi/Wired icon:

The icon to the left of the Connection Status Icon displays whether the current

 

connection to the Master is Wireless (image of a radio antenna) or Wired

 

(image of three networked computers).

 

 

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state

 

of the panel to the master.

 

Bright red - disconnected

 

Bright green - connected. Blinks when a blink message is received to dark

 

 

green every 5 seconds for half a second then go back to bright green.

 

Bright yellow - panel missed a blink message from the master. It will

 

 

remain yellow for 3 missed blink messages and then turn red. It will return

 

 

to green when a blink message is received.

 

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

 

Master.

 

 

IP Settings:

Sets the IP communication values for the panel:

DHCP/STATIC

 

Sets the panel to either DHCP or Static communication modes.

 

DHCP - a temporary IP Addresses is assigned to the panel by a DHCP

 

 

server.

 

Static IP is a permanent IP Address assigned to the panel. If Static IP is

 

 

selected, the other IP Settings fields are enabled (below).

IP Address

 

Enter the secondary IP address for this panel.

Subnet Mask

 

Enter the subnetwork address for this panel.

Gateway

 

Enter the gateway address for this panel.

Host Name

 

Enter the host name for this panel.

Primary DNS

 

Enter the address of the primary DNS server used by this panel for host name

 

lookups.

Secondary DNS

 

Enter the secondary DNS address for this panel.

 

 

Domain

Enter a unique name to the panel for DNS look-up.

 

 

 

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

57

 

 

Page 71
Image 71
AMX MVP-8400i manual Wireless Settings, IP Settings