AMX MVP-8400i manual Skt, Sho, Sto, Tec, Tef

Programming

"^" Button Commands (Cont.)

^SKT	Syntax:
Enable socket	"'^SKT'"
touch	Example:
	SEND COMMAND Panel,"'^SKT'"
	Example:
	Press,34,203
	Release,34,21
	Move,30,20
	Opens up a listening TCP socket on port specified by send_command (must be > 1023).
	User can connect to socket and read touch values for the panel. Format of the output is:
	<Press/Release/Move>,<x-coordinate>,<y-coordinate>
^SHO	Syntax:
Show or hide a	"'^SHO-<vt addr range>,<command value>'"
button with a set	Variable:
variable text	variable text address range = 1 - 4000.
range.
	command value = (0= hide, 1= show).
	Example:
	SEND_COMMAND Panel,"'^SHO-500.504&510.515,0'"
	Hides buttons with variable text address range 500-504 & 510-515.
^STO	Syntax:
Set the timeout	"'^STO'"
value for	Example:
shutdown	SEND COMMAND Panel,"'^STO'"
	Sets the timeout value for shutting down the panel.
^TEC	The Text Effect is specified by name and can be found in TPD4. You can also assign the
Set the text effect	color by name or RGB value (RRGGBB or RRGGBBAA).
	Syntax:
color for the
specified	"'^TEC-<vt addr range>,<button states range>,<color value>'"
addresses/states	Variable:
to the specified
	variable text address range = 1 - 4000.
color.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	color value = Refer to theRGB Values for all 88 Basic Colors table on page 101.
	Example:
	SEND_COMMAND Panel,"'^TEC-500.504&510.515,1&2,12'"
	Sets the text effect color to Very Light Yellow on buttons with variable text 500-504
	and 510-515.
^TEF	The Text Effect is specified by name and can be found in TPD4.
Set the text effect.	Syntax:
	"'^TEF-<vt addr range>,<button states range>,<text effect name>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	text effect name = Refer to theText Effects table on page 126 for a listing of text
	effect names.
	Example:
	SEND_COMMAND Panel,"'^TEF-500.504&510.515,1&2,Soft Drop Shadow
	3'"
	Sets the text effect to Soft Drop Shadow 3 for the button with variable text range 500-504
	and 510-515.

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom 123