AMX MVP-8400i manual Panel Setup Commands

Programming

Panel Setup Commands

These commands are case insensitive.

Panel Setup Commands

CLOCK	Syntax:
Sets the time and date	“’CLOCK mm-dd-yy hh:mm:ss’”
on the panel.	Variables:
	mm = Month
	dd = Day
	yy = Year
	hh = Hour
	mm = Minute
	ss = Second
	Example:
	SEND_COMMAND Panel, “’CLOCK 04-19-76 19:16:00’”
	Sets the time and date on the panel to April 19, 1976, 7:16 PM.
^CFE	Syntax:
Enable or disable the	“’^CFE-<0/1>’”
image Flash backup	Variables:
cache	0 - for disable
	1 - for enable
	Example:
	SEND_COMMAND Panel, “’^CFE-1’”
	Tells the cache manager to enable the Flash backup image cache.
^CPR	Syntax:
Purge the cache when	“’^CPR-<cache mask>’”
needed in the context of	Variables:
the running program.	cache mask:
	• 0x0001 - Purge non-volatile (Flash) image cache
	• 0x0002 - Purge RAM image cache
	• 0x0003 - Purge both non-volatile and RAM image caches
	Example:
	SEND_COMMAND Panel, “’^CPR-3’”
	Purges all images from both primary RAM cache and backup Flash cache.
^CFS	Syntax:
Modifies the size of the	“’^CFS-<size in MB>’”
backup image Flash	Variable:
cache.	size in MB - MB of allocated Flash memory
	Example:
	SEND_COMMAND Panel, “’^CFS-12’”
	Modifies the Flash cache size to 12MB.
	The space is not immediately allocated to the backup cache, it is consumed as
	needed for new entries in the Flash cache. If the size is reduced to something less
	than the size of the items currently stored in Flash cache, the least recently used
	items are deleted one by one until the used disk space is less than the maximum
	provided in the ^CFS command. If the size is larger than the maximum size allowed
	for the Flash cache (determined by taking 75% of free Flash space), the size reverts
	to the maximum size allowed.

144 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom