AMX MVP-8400i manual Table of Contents

	Table of Contents
Table of Contents
MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom	1
Overview	1
Specifications	2
MVP-BP Power Pack	5
Overview	5
MVP-BP Specifications	5
Installing MVP-BP Batteries	5
NXA-CFSP Compact Flash	7
Overview	7
Compact Flash Card - Security	7
Installing the NXA-CFSP Compact Flash Card	7
Accessing the MVP’s Internal Components	7
Removing the Installed Card	8
Installing the Compact Flash Upgrade Card	8
Panel Calibration	11
Calibrating the MVP Panels	11
Testing your Calibration	12
If Calibration Is Not Working	12
Configuring Communications	13
Modero Setup and System Settings	13
Accessing the Setup and Protected Setup Pages	13
Setting the Panel’s Device Number	13
Wireless Settings Page - Wireless Access Overview	13
Hot Swapping	13
Configuring a Wireless Network Access	14
Step 1: Configure the Panel’s Wireless IP Settings	14
Wireless communication using a DHCP Address	14
Wireless communication using a Static IP Address	15
Simple versus Enterprise Configuration	16
Using the Site Survey tool	18
Step 2: Configure the Card’s Wireless Security Settings	19
Configuring the Modero’s wireless card for unsecured access to a WAP200G	19
Configuring the Modero’s wireless card for secured access to a WAP200G	20
Automatically set SSID	21
Manually set SSID	21
Configuring multiple wireless Moderos to communicate to a target WAP200G	23
Step 3: Choose a Master Connection Mode	24

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom i