AMX MVP-8400i manual Time & Date Settings, Time Date Refresh/Set, Time Display fields

Setup Pages

Time & Date Settings

The options on the Time & Date Settings page (FIG. 47) allow you to set and adjust time and date information on the NetLinx Master. If the time and/or date on the Master is modified, all connected devices will be updated to reflect the new information.

FIG. 47 Time and Date Setup page

MVP touch panels do not have an on-board clock. The only way to modify a panel’s time without altering the Master is via NetLinx Code.

Features on this page include:

Time & Date Settings Page

Back:	Saves all changes and returns to the previous page.
WiFi/Wired icon:	The icon to the left of the Connection Status Icon displays whether the current
	connection to the Master is Wireless (image of a radio antenna) or Wired (image of
	three networked computers).
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state of
	the panel to the master.
	•	Bright red - disconnected
	•	Bright green - connected. Blinks when a blink message is received to dark
		green every 5 seconds for half a second then go back to bright green.
	•	Bright yellow - panel missed a blink message from the master. It will remain
		yellow for 3 missed blink messages and then turn red. It will return to green
		when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
Time Date Refresh/Set:	This section provides two options:
	•	The Get Time/Date button retrieves Time and Date information from the
		Master.
	•	The Set Time/Date button sets the Master to retain and save any time/date
		modifications made on the panel.
Time Display fields:	• These fields display the time in three formats: STANDARD, STANDARD AM/
		PM, and 24 HOUR.
Date Display fields:	•	These fields display the calendar date information in several different formats.

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom 47