AMX MVP-8400i manual @Dpg, @Pdr, @Phe, @Php, @Pht

Programming

Page Commands (Cont.)

@DPG	Syntax:
Delete a specific	"'@DPG-<popup page name>;<popup group name>'"
popup page from	Variable:
specified popup	popup page name = 1 - 50 ASCII characters. Name of the popup page.
group if it exists.
	popup group name = 1 - 50 ASCII characters. Name of the popup group.
	Example:
	SEND_COMMAND Panel,"'@DPG-Popup1;Group1'"
	Deletes the popup page ’Popup1’ from the popup group ’Group1’.
@PDR	If the flag is set, the popup will return to its default location on show instead of its last drag
Set the popup	location.
	Syntax:
location reset flag.
	"'@PDR-<popup page name>;<reset flag>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	reset flag = 1 = Enable reset flag
	0 = Disable reset flag
	Example:
	SEND_COMMAND Panel,"'@PDR-Popup1;1'"
	Popup1 will return to its default location when turned On.
@PHE	Syntax:
Set the hide effect	"'@PHE-<popup page name>;<hide effect name>'"
for the specified	Variable:
popup page to the	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
named hide effect.
	On.
	hide effect name = Refers to the popup effect names being used.
	Example:
	SEND_COMMAND Panel,"'@PHE-Popup1;Slide to Left'"
	Sets the Popup1 hide effect name to ’Slide to Left’.
@PHP	Only 1 coordinate is ever needed for an effect; however, the command will specify both.
Set the hide effect	This command sets the location at which the effect will end at.
position.	Syntax:
	"'@PHP-<popup page name>;<x coordinate>,<y coordinate>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	Example:
	SEND_COMMAND Panel,"'@PHP-Popup1;75,0'"
	Sets the Popup1 hide effect x-coordinate value to 75 and the y-coordinate value to 0.
@PHT	Syntax:
Set the hide effect	"'@PHT-<popup page name>;<hide effect time>'"
time for the	Variable:
specified popup	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
page.
	On.
	hide effect time = Given in 1/10ths of a second.
	Example:
	SEND_COMMAND Panel,"'@PHT-Popup1;50'"
	Sets the Popup1 hide effect time to 5 seconds.

96 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom