Setup Pages

Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image Cache page. All status information is located in the Image Cache Status section of the page.

Password Settings Page

The options on the Password Settings page enable you to assign the passwords required for users to access the Protected Setup page, and to release the MVP from a MVP-TDS or MVP-WDS docking station (FIG. 61).

FIG. 61 Password Setup page

Features on this page include:

Password Settings Page

Back:

Saves all changes and returns to the previous page.

 

 

WiFi/Wired icon:

The icon to the left of the Connection Status Icon displays whether the current

 

connection to the Master is Wireless (image of a radio antenna) or Wired

 

(image of three networked computers).

 

 

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state

 

of the panel to the master.

 

Bright red - disconnected

 

Bright green - connected. Blinks when a blink message is received to dark

 

 

green every 5 seconds for half a second then go back to bright green.

 

Bright yellow - panel missed a blink message from the master. It will

 

 

remain yellow for 3 missed blink messages and then turn red. It will return

 

 

to green when a blink message is received.

 

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

 

Master.

 

 

In Panel Password

Accesses the alphanumeric values associated to particular password sets.

Change:

• The PASSWORD 1, 2, 3, 4, and 5 (protected) buttons open a keyboard to

 

 

enter alphanumeric values associated to the selected password group.

 

Note: Clearing Password #5 removes the need to enter a password before

 

accessing the Protected Setup page.

 

 

 

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

77

 

 

Page 91
Image 91
AMX MVP-8400i manual Password Settings, Panel Password, Change