AMX MVP-8400i Device Information, Docking Station, Options, System Recovery, Reboot / Shutdown

Setup Pages

Protected Setup Page (Cont.)

Device Information	The fields and buttons in this section control the device name and number
	information.
	•	Device Number - opens a keypad used to view/set the device number of
		the panel.
	•	Device Name - Opens a keypad used to view/set the device name of the
		panel
	•	Synchronize Panel Names - Synchronizes the Device Name, IP
		Hostname, and G4 Web Control Name. When synchronizing other names
		to the Device Name, this opens a Confirmation Dialogue asking "Are you
		sure you want to do this?"
	- Pressing Yes synchronizes the names.
	- Pressing No returns you to the Protected Setup page.
Docking Station:	• Dock Status - illuminates when the MVP is docked and communicating
		with the Docking Station.
	•	Undock Panel - forces the docking station to release the MVP without
		requiring a User Access username or password.
	•	Disable Docking Station LED - disables the display of the LEDs on the
		docking station.
Options:	•	Function Show - toggles the display of the channel port, channel code,
		level port and level code on all touch panel buttons (see FIG. 51).
	•	Telnet - enables/disables the panel’s telnet server (to allow direct telnet
		communication to the panel).
	•	Page Tracking - toggles the page tracking function. When enabled, the
		panel reports page data to the NetLinx Master.
	•	Front Button Setup Access - activates the two lower buttons on the front
		of the panel for accessing the Setup and Calibration pages (see
		FIG. 41 on page 41). The default setting is On.
	- Press and hold these buttons for 3 seconds to access the Setup page.
	- Press and hold these buttons for 6 seconds to access the Calibration page.
	•	Standard Security - This button is blocked out.
System Recovery:	•	Remove User Pages - allows you remove all TPD4 touch panel pages
		currently on the panel, including the pre-installed AMX Demo pages. This
		option invokes a Confirmation dialog, prompting you to confirm your
		selection before removing the panel pages.
	Note that the YES button on the Confirmation dialog is disabled for 5 seconds
	as additional protection against accidentally resetting the panel or removing
	the panel pages.
	•	Reset System Settings - deletes all of the current configuration
		parameters on the panel (including IP Addresses, Device Number
		assignments, Passwords, and other presets). This option invokes a
		Confirmation dialog, prompting you to confirm your selection before
		resetting the panel.
Reboot / Shutdown:	•	Reboot - pressing this button causes the panel to reboot after saving any
		changes.
	•	Shutdown - This button will shut down the panel entirely, requiring a
		manual restart. This button is disabled when the panel is connected to a
		power source such as a docking station, and will only be enabled when
		running on battery power.

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom 53