AMX MVP-8400i manual Cfsm, Cex, Icm-Talk, Icm-Listen, Icm-Mutemic

Programming

Panel Setup Commands (Cont.)

^CFSM	Syntax:
Sets the Flash cache to	“’^CFSM’”
the maximum	Variable:
available size allowed	There is no parameter for this command.
for backup Flash cache.
	Example:
(determined by taking	SEND_COMMAND Panel, “’^CFSM’”
75% of free Flash
space)	Modifies the Flash cache size to the maximum available size for the device.
^CEX	Syntax:
Changes the default	“’^CEX-<time index>’”
expiration time for	Variable:
entries in the image	time index:
cache (applies to both
	• 1 = 2 Hours
primary RAM cache and
	• 2 = 8 Hours
backup Flash cache).
	• 3 = 1 Day
The default
expiration time applies	• 4 = 2 Days
to dynamic images only.	• 5 = 5 Days
	• 0 = NEVER
	Example:
	SEND_COMMAND Panel, “’^CEX-4’”
	Changes the default expiration time to 2 Days.
^DLD	Syntax:
Set the disable cradle	“’^DLD-<0/1>’”
LED flag.	Variables:
	0 - LEDs operate normally
	1 - Cradle LEDs operate dim setting only
	Example:
	SEND_COMMAND Panel, “’^DLD-1’”
	Sets the cradle LEDs to the dim setting.
^ICM-TALK	Intercom modify command. For backwards compatibility both versions are
^ICM-LISTEN	supported.
	In this release, however, the TALK and LISTEN subcommands are ignored. The
Intercom modify
	microphone and/or speaker are activated based on the initial mode value of the
command.
	intercom start command and the audio data packet flow is started upon receipt of
	this command by the panel.
	Syntax:
	SEND_COMMAND <DEV>,"'^ICM-TALK'"
	Variables:
	None.
	Example:
	SEND_COMMAND TP1,"'^ICM-TALK'"
^ICM-MUTEMIC	Syntax:
Set the state of the	"'^ICM-MUTEMIC,<state>'"
microphone on a panel	Variables:
to muted (1) or unmuted	0 - unmuted
(0). At the start of each
	1 - muted
call the microphone
	Example:
starts out unmuted.
	SEND_COMMAND Panel, “^ICM-MUTEMIC,1”
	Sets the microphone to muted.

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom 145