AMX MVP-8400i - page 51

Upgrading MVP Firmware

37

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

2. After the panel powers-up, press and hold the two lower buttons on both sides of the display for 

3 seconds to continue with the setup process and proceed to the Setup page.

3. Press the Batteries button to open the Batteries page (FIG. 39).

Step 2: Upgrade the Docking Station firmware via USB

1. Complete the procedures outlined in the Step 1: Configure the panel for a USB Connection Type section on page 34.

2. Prepare NetLinx Studio for communication to the panel via a Virtual Master by following the procedures outlined

in the Step 2: Prepare Studio for communication via the USB port section on page 34.

3. After the Communication Verification dialog window verifies active communication between the Virtual Master

and the panel, click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. The

default System value is one.

4. Right-click on the System entry and select Refresh System to re-populate the list. Verify the panel appears in the

OnLine Tree tab of the Workspace window. 

The default Modero panel value is 10001.

5. Locate the latest firmware file from the www.amx.com > Tech Center > Downloadable Files > Firmware Files >

Modero Panels firmware (MVP Docking Stations: MVP-TDS/WDS) section of the website.

6. Click on the desired Kit file link and after you’ve accepted the Licensing Agreement, verify you have downloaded

the Docking Station Kit file to a known location.

FIG. 38 Location of Firmware version information within NetLinx Studio

FIG. 39 Batteries page

TDS/WDS

(station version)

Target Panel Device #

NetLinx Studio Online Tree tab

Accessory’s corresponding firmware page

Displays the current

docking station firmware version

The docking station firmware is shown on the right of the Batteries page.



Verify you have downloaded the latest fi rmware file from www.amx.com and then

save the Kit file to your computer.

Contents

Main AMX Limited Warranty and Disclaimer AMX Software License and Warranty Agreement Page Table of Contents MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom .................1 Page Page Page Page Page Page Page Page Page MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom Specifications colors. MVP-8400i Specifications (FG5965-04) Page MVP-8400i Specifications (FG5965-04) (Cont.) MVP-BP Power Pack MVP-BP Specifications Installing MVP-BP Batteries 1. 2. 3. 4. NXA-CFSP Compact Flash Compact Flash Card - Security Installing the NXA-CFSP Compact Flash Card Accessing the MVPs Internal Components 1. 2. Page 6. Page Panel Calibration Calibrating the MVP Panels 1. 2. 3. Page Configuring Communications Modero Setup and System Settings Accessing the Setup and Protected Setup Pages 1. 2. Setting the Panels Device Number Configuring a Wireless Network Access Step 1: Configure the Panels Wireless IP Settings Wireless communication using a DHCP Address 1. 2. 3. Page Page 4. 1. 2. 3. Using the Site Survey tool 1. 2. 3. 4. 5. Step 2: Configure the Cards Wireless Security Settings Configuring the Moderos wireless card for unsecured access to a WAP200G 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Page 3. 4. 5. 6. 7. Page Step 3: Choose a Master Connection Mode Page Page Page 9. 10. 17. 11 . 12. 13. Using G4 Web Control to Interact with a G4 Panel Page Using your NetLinx Master to control the G4 panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11 . Upgrading MVP Firmware 1. Upgrading the Modero Firmware via the USB port Page Page Upgrading the Docking Station Firmware via USB Page Page Page Page Setup Pages Navigation Buttons The following Navigation buttons (FIG. 42) appear on the left side of the Setup page: Setup Pages The Setup page (FIG. 43) allows quick access to several basic panel properties: Features on this page include: Setup Page Protected Settings Information Setup Page (Cont.) Project Information Page Features on this page include: Project Information Page Panel Information Page The Panel Information page provides detailed panel information (FIG. 46). Project Information Page (Cont.) IR receivers and transmitters on G4 panels share the device address number of the panel. Features on this page include: Panel Information Page Time & Date Settings Audio Settings Features on these pages include: Time & Date Settings Page (Cont.) Audio Settings Page WAV files - Supported sample rates The following sample rates for WAV files are supported by MVP-8400 panels: Audio Settings Page (Cont.) Supported WAV Sample Rates Battery Settings Features on this page include: Battery Settings Page Battery Settings Page (Cont.) Protected Setup Pages Protected Setup Page (Cont.) Protected Setup Navigation Buttons BUTTON System Settings Page The System Settings page (FIG. 53) displays sets the NetLinx Masters communication settings. The elements of this page include: System Settings Page Elements System Settings Page Elements Wireless Settings Page Features on this page include: Wireless Settings Page Wireless Settings Page (Cont.) Wireless Security: Simple Mode Wireless Security: Enterprise Mode Wireless Settings Open Settings WEP Settings WEP Settings (Cont.) WPA-PSK Settings EAP-LEAP Settings EAP-FAST Settings EAP-PEAP Settings EAP-TTLS Settings EAP-TTLS Settings (Cont.) EAP-TLS Settings Client certificate configuration Calibrate Page G4 Web Control Settings Page Features on this page include: G4 Web Control Page Other Settings Cache Settings Page Page Setting the image cache 1. 2. 3. Clearing the image cache 1. 2. Checking image cache status Password Settings Page SIP Settings Page SIP Settings Page Tools Panel Connection Logs Page Page Panel Statistics Page Features on this page include: Panel Statistics Page Page Features on this page include: Using the Connection Utility 1. 2. 3. 4. Connection Utility Page EAP Security & Server Certificates Page Full Duplex Intercom Page Page Sample Intercom Page Sample Intercom Page (Cont.) Answering an incoming call To answer a call: In the popup window, press the Answer button. Sample Intercom Page (Cont.) Creating Intercom Pages Page Programming Button Assignments Page Commands Page Page Page Page Page Programming Numbers RGB triplets and names for basic 88 colors RGB Values for all 88 Basic Colors RGB Values for all 88 Basic Colors (Cont.) Font Styles and ID Numbers Border Styles and Programming Numbers Border styles can be used to program borders on buttons, sliders, and popup pages. Border Styles and Programming Numbers TPD4 Border Styles by Name TPD4 Border Styles by Name (Cont.) "^" Button Commands TPD4 Border Styles by Name (Cont.) "^" Button Commands Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Miscellaneous MVP Strings back to the Master The following two strings are sent by the MVP panel back to the communicating Master: MVP Panel Lock Passcode commands MVP Strings to Master MVP Panel Lock Passcode Commands Text Effects Names Button Query Commands All custom events have the following 6 fields: Custom Event Fields Page Page Page Page Page Page Page Page Page Panel Runtime Operations Panel Runtime Operation Commands Page Page Page Input Commands These Send Commands are case insensitive. Input Commands Input Commands (Cont.) Embedded codes The following is a list of G4 compatible embedded codes: Embedded Codes Panel Setup Commands These commands are case insensitive. Panel Setup Commands Page Panel Setup Commands (Cont.) Dynamic Image Commands The following table describes Dynamic Image Commands. Dynamic Image Commands ^RAF, ^RMF - Embedded Codes The <data> variable uses the embedded codes described in the following table: Dynamic Image Commands (Cont.) ^RAF, ^RMF - Embedded Codes Escape Sequences ^RAF, ^RMF - Embedded Codes (Cont.) Escape Sequences Intercom Commands The following is a listing and descriptions of panel intercom commands. Intercom Commands SIP Commands SIP Commands Page SIP Setup Commands Page Page Appendix A: Text Formatting Text Formatting Codes for Bargraphs/Joysticks Text Area Input Masking Input mask character types Input mask ranges Input mask next field characters Input mask operations Input mask literals Input mask output examples URL Resources Special escape sequences Page Appendix B - Wireless Technology Overview of Wireless Technology Terminology Page Page EAP Authentication EAP characteristics EAP communication overview AMX Certificate Upload Utility Configuring your G4 Touch Panel for USB Communication How to Upload a Certificate File 12. 13. Erasing All Certificates From the Touch Panel Appendix C: Troubleshooting Checking AMX USBLAN Device Connections via Windows Device Manager 1. 2. 3. 4. Checking AMX USBLAN Device Connections via NetLinx Studio 1. 2. 3. 4.