Configuring Communications

Automatically set SSID

In the Protected Setup page:

1.Select Wireless Settings.

2.Press the Site Survey button.

3.Select a WEP secured WAP from within the Wireless Site Survey page, and press the Connect button.

Select a target WAP with the desired level of security

Connecting to the WAP begins the communication

FIG. 20 Site Survey of available WAPs (Secured WAP shown selected)

4.Write down the SSID name, Current Key string value, and panel MAC Address information so you can later enter it into the appropriate WAP dialog fields in order to "sync-up" the secure connection. These values must be identically reproduced on the target WAP.

Manually set SSID

In the Protected Setup page:

1.Select Wireless Settings.

2.In the IP Settings section, press the DHCP/Static field until it reads "Static".

FIG. 21 Wireless Settings page

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

21

 

 

Page 35
Image 35
AMX MVP-8400i manual Automatically set Ssid, Manually set Ssid