AMX MVP-8400i manual Battery Settings, Limit

Setup Pages

Battery Settings

The options on this page allow you to set power warning preferences, monitor battery status information, and adjust the display times for battery warnings. This page is populated with information from MVP-BP batteries in the panel, as well as batteries in a connected MVP-TDS/WDS docking station (FIG. 49).

FIG. 49 Battery Settings page

Features on this page include:

Battery Settings Page

Back:	Saves all changes and returns to the previous page.
WiFi/Wired icon:	The icon to the left of the Connection Status Icon displays whether the current
	connection to the Master is Wireless (image of a radio antenna) or Wired
	(image of three networked computers).
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state
	of the panel to the master.
	•	Bright red - disconnected
	•	Bright green - connected. Blinks when a blink message is received to dark
		green every 5 seconds for half a second then go back to bright green.
	•	Bright yellow - panel missed a blink message from the master. It will
		remain yellow for 3 missed blink messages and then turn red. It will return
		to green when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
Battery Power Brightness	The DISABLE/DISABLED button acts as a power save feature with two options:
Limit:	•	Disable - activates the brightness limit set on the panel (conserves battery
		power). Activating this feature causes the panel to function at 80% of full
		brightness and overrides the Panel Brightness value set on the Setup
		page.
	•	Disabled - deactivates this power save feature. The panel will use the
		Panel Brightness level.
	Note: This field applies to MVP-BP batteries installed in the panel.

50 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom