AMX MVP-8400i Setting the image cache, Clearing the image cache, Checking image cache status

Setup Pages

Cache Settings Page Elements (Cont.)

Flash/RAM Cache Expires	Press the Up and Down arrows to change the amount of time the images stay
	in cache memory. The options are:
	• Never
	• 2 Hours
	• 8 Hours
	• 1 Day
	• 2 Days
	• 5 Days
Enable:
	Press this button to toggle the image Flash cache option On and Off.
Clear Cache:	Press this button to clear both the Flash and RAM cache of all stored images.
Image Cache Status:	The status of the memory available versus in use.
RAM Max Size
	The maximum amount of memory available for all image caching.
RAM Current Size
	The memory that is currently in use for caching static and dynamic images.
RAM Hit Rate
	The percentage of image requests (static and dynamic) satisfied by accessing
	the cache.
	100 * (# of cache hits) / (# of cache hits + # of cache misses)
	# of cache hits - the number of times an image was requested that the image
	was found in the cache. If your hit rate is low, you may want to consider
	enabling Flash cache.
	# of cache misses - the number of times an image was requested that the
	image could not be found in the cache, and the image had to either be loaded
	from flash or obtained via the network (for dynamic images). It is considered a
	RAM Cache Miss even if the image is subsequently found in flash cache.
Items in Cache (RAM)
	The number of images that are currently stored in the RAM cache.
Flash Current Size
	The maximum flash space allocated for image caching. Flash space is used for
	caching only when there is not enough available memory in the RAM cache for
	a newly requested image (it is used only for dynamic images).
Flash Hit Rate
	The percentage of image requests (dynamic only) that are satisfied by
	accessing the flash cache.
	100 * (# of flash cache hits) / (# of flash cache hits + # of flash cache misses)
	# of flash cache hits - # of times a dynamic image could not be found in RAM
	cache but was found in flash cache
	# of flash cache misses - # of times a dynamic image could not be found in
	either RAM or flash cache. RAM cache hits are not relevant in this calculation.
Items in Cache (Flash)
	The number of images that are currently stored in the Flash cache.

Setting the image cache

In the Protected Setup page:

1.Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Cache Settings page.

2.Set the cache expiration in the field Flash/RAM Cache Expires. The Up and Down arrows increment through the available time frames.

3.Press the Enable button to turn on image caching. The button appears illuminated when enabled.

Select the Up and Down arrows for the field Flash Cache Size to increase or reduce the amount of Flash memory used; the maximum amount of flash that can be allocated for caching is 75% of available flash.

Clearing the image cache

In the Protected Setup page:

1.Press the Cache button in the Protected Setup Navigation Buttons section. This opens the Image Cache page.

2.Press Clear Cache. This clears all image cache currently stored on the panel (both Flash and RAM).

Checking image cache status

In the Protected Setup page:

76 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom