AMX MVP-8400i manual SIP Setup Commands

Programming

SIP Commands (Cont.)

^PHN-REDIAL	Syntax:
Redials the last	"’^PHN-REDIAL’"
number.	Example:
	SEND_COMMAND Panel,"'^PHN-REDIAL'"
^PHN-	Syntax:
TRANSFER	"’^PHN-TRANSFER, <connection id>, <number>’"
Transfers the call	Variable:
to the provided	connection id = The identifying number of the connection
number.
	number = The number to which you want to transfer the call.
	Example:
	SEND_COMMAND Panel,"'^PHN-TRANSFER, 1, 2125551000'"

The following table lists and describes SIP setup commands. Using any of these commands causes the current user to go offline.

SIP Setup Commands

^PHN-SETUP-	Syntax:
DOMAIN	"’^PHN-SETUP-DOMAIN,<domain>’"
Sets the realm for	Variable:
authentication.	domain = The realm used for authentication
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-DOMAIN,asterisk’"
^PHN-SETUP-	Once the configuration has been updated, the ENABLE command should be run to
ENABLE	re-register the new user.
Registers a new	Syntax:
user	"’^PHN-SETUP-ENABLE’"
^PHN-SETUP-	Syntax:
PASSWORD	"’^PHN-SETUP-PASSWORD,<password>’"
Sets the user	Variable:
password for the	password = The password for the user name
proxy server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-PASSWORD,6003’"
^PHN-SETUP-	Syntax:
PORT	"’^PHN-SETUP-PORT,<port>’"
Sets the port	Variable:
number for the	port = The port for the proxy server
proxy server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-PORT,5060’"
^PHN-SETUP-	Syntax:
PROXYADDR	"’^PHN-SETUP-PROXYADDR,<IP>’"
Sets the IP	Variable:
address for the	IP = The IP address for the proxy server
proxy server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-PROXYADDR,192.168.223.111’"
^PHN-SETUP-	Syntax:
STUNADDR	"’^PHN-SETUP-STUNADDR,<IP>’"
Sets the IP	Variable:
address for the	IP = The IP address for the STUN server
STUN server.
	Example:
	SEND_COMMAND Panel,"’^PHN-SETUP-STUNADDR,192.168.223.111’"

154 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom