Setup Pages

Project Information Page

The Project Information page displays the project properties of the TPDesign4 project file currently loaded on the panel (FIG. 45).

FIG. 45 Project Information page

Features on this page include:

 

 

Project Information Page

 

 

 

 

 

 

 

 

 

Back:

Saves all changes and returns to the previous page.

 

 

 

 

 

 

 

 

WiFi/Wired icon:

The icon to the left of the Connection Status Icon displays whether the current

 

 

 

 

connection to the Master is Wireless (image of a radio antenna) or Wired (image of

 

 

 

 

three networked computers).

 

 

 

 

 

 

 

 

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state of

 

 

 

 

the panel to the master.

 

 

 

 

•

Bright red - disconnected

 

 

 

 

•

Bright green - connected. Blinks when a blink message is received to dark

 

 

 

 

 

green every 5 seconds for half a second then go back to bright green.

 

 

 

 

•

Bright yellow - panel missed a blink message from the master. It will remain

 

 

 

 

 

yellow for 3 missed blink messages and then turn red. It will return to green

 

 

 

 

 

when a blink message is received.

 

 

 

 

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

 

 

 

 

Master.

 

 

 

 

 

 

 

 

File Name:

Displays the name of the TPDesign4 project file downloaded to the panel.

 

 

 

 

 

 

 

 

Designer ID:

Displays the designer information.

 

 

 

 

 

 

 

 

File Revision:

Displays the revision number of the file.

 

 

 

 

 

 

 

 

Dealer ID:

Displays the dealer ID number (unique to every dealer and entered in TPD4).

 

 

 

 

 

 

 

 

Job Name:

Displays the job name.

 

 

 

 

 

 

 

 

Sales Order:

Displays the sales order information.

 

 

 

 

 

 

 

 

Purchase Order:

Displays the purchase order information.

 

 

 

 

 

 

 

 

AMX IR 38K Port:

Displays the AMX 38 kHz IR channel port used by the IR Emitter on the panel.

 

 

 

 

•

This information is specified in TPD4 (Project Properties > IR Emitters &

 

 

 

 

 

Receivers tab).

 

 

 

 

•

For example if you set the AMX IR 38K Port to 7 and then put a button on the

 

 

 

 

 

panel with a channel code of 5 and a port of 7, it will trigger the IR code in slot

 

 

 

 

 

5 of the AMX IR 38K Port.

 

 

44

 

 

 

 

 

 

 

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

 

 

 

 

 

 

 

 

 

Page 57 Page 59
Page 58
Image 58
AMX MVP-8400i manual Project Information
Page 57 Page 59
Top Page Image Contents