AMX MVP-8400i manual Wireless Security Simple Mode, Ssid

Setup Pages

FIG. 55 Wireless Security: Simple Mode

Wireless Security: Simple Mode

Security Type:	This field may be switched between WEP, WPA-PSK, and Open. If WEP is
	selected, the button to the right may be switched between 64 and 128.
	•	WEP security requires that both a target WAP be identified and an
		encryption method be implemented prior to establishing communication.
		(Refer to the WEP Settings section on page 62 for further details.)
	•	WPA-PSKsecurity is designed for environments where is it desirable to
		use WPA or WPA2, but an 802.1x authentication server is not available.
		PSK connections are more secure than WEP and are simpler to configure
		since they implement dynamic keys but share a key between the WAP and
		the panel (client). (Refer to the WPA-PSK Settings section on page 64 for
		further details.)
	•	Open security does not utilize any encryption methodology, but requires an
		SSID (alpha-numeric) entry. This entry must match the Network Name
		(SSID) entry of the target WAP so the panel knows what device it is using
		to communicate with the network. (Refer to the following Open
		Settings section on page 62 for further details.)
SSID:	Press this field to enter a 32-character Network Name in the Network Name
	keypad.
Password:	This field is only enabled when WPA-PSKis selected as the Security Type.
	Clicking this field opens the Password/Pass Phrase keyboard
WEP Keys:	These buttons are only enabled when WEP is selected as the Security Type.
	Press each one to open a keyboard to enter a 10-digit WEP Key.
Default Key:	This field is only enabled when WEP is selected as the Security Type. Press the
	field to select which of the four WEP Keys is the default.
Current Key:	This field is only populated when WEP is selected as the Security Type.
Authentication:	This field is only enabled when WEP is selected as the Security Type. Press the
	field to select between Shared and Open.
Cancel/Save:	Press Cancel to return to the Wireless Settings page without saving any
	changes. Press Save to save all changes and return to the Wireless Settings
	page.

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom 59