Setup Pages

Features on this page include:

Panel Information Page

Back:

Saves all changes and returns to the previous page.

 

 

WiFi/Wired icon:

The icon to the left of the Connection Status Icon displays whether the current

 

connection to the Master is Wireless (image of a radio antenna) or Wired

 

(image of three networked computers).

 

 

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state

 

of the panel to the master.

 

Bright red - disconnected

 

Bright green - connected. Blinks when a blink message is received to dark

 

 

green every 5 seconds for half a second then go back to bright green.

 

Bright yellow - panel missed a blink message from the master. It will

 

 

remain yellow for 3 missed blink messages and then turn red. It will return

 

 

to green when a blink message is received.

 

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

 

Master.

 

 

Panel Type:

Displays the model of the panel being used.

 

 

Firmware Version:

Displays the version number of the G4 firmware loaded on the panel.

 

 

Setup Port:

Displays the setup port information (value) being used by the panel.

 

 

High Port:

Displays the high port (port count) value for the panel.

 

 

High Address:

Displays the high address (address count) value for the panel.

 

 

High Channel:

Displays the high channel (channel count) value for the panel.

 

 

High Level:

Displays the high level (level count) value being used by the panel.

 

 

Serial Number:

Displays the specific serial number value assigned to the panel.

 

 

Setup Pages Version:

Displays the type and version of the Setup pages being used by the panel.

 

 

Screen Width:

Displays the screen width (in pixels).

 

MVP-8400 = 800

 

 

Screen Height:

Displays the screen height (in pixels).

 

MVP-8400 = 600 pixels.

 

 

Screen Refresh Rate:

Displays the video refresh rate applied to the incoming video signal from the

 

panel.

 

 

Screen Rotation:

Displays the degree of rotation applied to the on-screen image.

 

 

Power Up Pages:

Displays the page assigned to display after the panel is powered-up.

 

 

Start Up String:

Displays the start-up string.

 

 

Wake Up String:

Displays the wake up string used after an activation from a timeout.

 

 

Sleep String:

Displays the sleep string used during a panel’s sleep mode.

 

 

File System:

Displays the amount of Compact Flash memory available on the panel.

 

 

RAM:

Displays the available RAM (or Extended Memory module) on the panel.

 

 

Panel Start Time:

Displays the last time the panel booted.

 

 

 

46

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom

Page 60
Image 60
AMX MVP-8400i manual Panel Information, Ram