AMX MVP-8400i manual Setup Pages, Navigation Buttons, WiFi/Wired icon, Connection Status

Setup Pages

Setup Pages

The Setup page (FIG. 43) allows quick access to several basic panel properties:

FIG. 43 MVP-8400 Setup page

Features on this page include:

Setup Page

Navigation Buttons:	The buttons along on the left side of the page provide access to secondary Setup
	pages (see following sections).
WiFi/Wired icon:	The icon to the left of the Connection Status Icon displays whether the current
	connection to the Master is Wireless (image of a radio antenna) or Wired (image of
	three networked computers).
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state of
	the panel to the master.
	•	Bright red - disconnected
	•	Bright green - connected. Blinks when a blink message is received to dark
		green every 5 seconds for half a second then go back to bright green.
	•	Bright yellow - panel missed a blink message from the master. It will remain
		yellow for 3 missed blink messages and then turn red. It will return to green
		when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
Connection Status:	Displays whether the panel is communicating externally as well as the encryption
	status of the Master, the connection type (Ethernet or USB), and what System the
	panel is connected to.
	•	Until a connection is established, the message displayed is: “Attempting
		via...”.
	•	When a connection is established, the message displayed is either:
		“Connected via Ethernet “or “Connected via USB “.
	•	The word “Encrypted” appears when an encrypted connection is established
		with a NetLinx Master.
	Note: The panel must be rebooted before incorporating any panel communication
	changes and to detect Ethernet connections.

42 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom