AMX MVP-8400i manual G4 Web Control Settings

Setup Pages

G4 Web Control Settings Page

An on-board VNC (Virtual Network Computing) server allows the panel to connect to any remote PC running a VNC client. Once connected, the client can view and control the panel remotely. The options on this page allow you to enable/ disable G4 Web Control functionality(FIG. 58).

FIG. 58 G4 Web Control page

Features on this page include:

G4 Web Control Page

Back:	Saves all changes and returns to the previous page.
WiFi/Wired icon:	The icon to the left of the Connection Status Icon displays whether the current
	connection to the Master is Wireless (image of a radio antenna) or Wired
	(image of three networked computers).
Connection Status icon:	The icon in the upper-right corner of each Setup page shows online/offline state
	of the panel to the master.
	•	Bright red - disconnected
	•	Bright green - connected. Blinks when a blink message is received to dark
		green every 5 seconds for half a second then go back to bright green.
	•	Bright yellow - panel missed a blink message from the master. It will
		remain yellow for 3 missed blink messages and then turn red. It will return
		to green when a blink message is received.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
G4 Web Control Settings:	Sets the IP communication values for the touch panel:
Enable/Enabled
	The Enable/Enabled button allows you to toggle between the two G4 activation
	settings:
	•	Enable - deactivates G4 Web Control on the panel.
	•	Enabled - activates G4 Web Control on the panel.
Network Interface Select
	Displays “Wireless” when the panel is communicating via a Wireless Access
	Point (WAP).
Web Control Name
	Use this field to enter a unique alpha-numeric string to be used as the panel’s
	display name within the Manage WebControl Connections window of the
	NetLinx Security browser window.
Web Control Password
	Use this field to enter the G4 Authentication session password required for
	VNC access to the panel.
Web Control Port
	Enter the number of the port used by the VNC Web Server. Default = 5900.

MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom 73