6.Proceed to enter a speaker “size” for each of the four positions

7.Use the and buttons on the front panel or remote to move the cursor to the SURR BACK OUT line.

You may skip this step if you have entered NONE for the SURR BACK SIZE setting. Here, you tell the system if you have a 6.1 or 7.1 system.

Select SBL if you are using a single Surround Back speaker. The ampli- fier channel for that speaker should be connected to the Surround Back Left speaker output (see the Connecting Loudspeakers to the Model 970 diagram on page 22).

Select LB/RB when you have two Surround Back speakers.

8.Use the and buttons on the front panel or remote to move the cursor to the SUBWOOFER line.

When the front speakers are set to SMALL it is automatically set to YES and no further adjustment is required. However, when the front speak- ers are set to LARGE, this setting lets you determine where the LFE and derived bass is directed.

Select LFE to send the special Low Frequency Effects channel information on multichannel digital sources to the subwoofer while a full range front channel signal will be sent to the front Left/Right speakers along with the derived bass signal from the other speaker positions.

Selecting L/R+Sub tells your processor that you want bass signals sent to your main L and R speakers in addition to your subwoofer. Choose this option only if your main L and R speakers have good bass handling capa- bility. It may be the best selection for medium-sized front speakers.

Select NONE to send all bass information, including both LFE and derived bass to the front left/right speakers.

9.When you have completed the configuration process for all main speaker positions and the subwoofer, use the and buttons on the front panel or remote to set the cursor to RETURN TO MAIN MENU.

10.Press SET on the front panel or the remote.

The Main Menu appears.

Speaker X-Over (Crossover) Configuration

A little theory before we begin. Think of a crossover as a dividing network that sends low frequencies to one speaker (usually the subwoofer) and higher frequencies to another speaker (your front L and R speakers, etc.) If this is a bit too technical just remember that a crossover lets the drivers (the domes, cones, ribbons, etc.) in your speakers work efficiently to reproduce only the frequency range they were designed to handle. Your Model 970 lets you set different crossover points for front, surround, and surround back speakers so you can enjoy the best performance with the speakers you’ve chosen.

To make these settings as accurate as possible, you may want to consult the owner’s manual for your speakers before entering the crossover settings. Look at the specs for the speakers and find the lowest frequency each speaker can handle. That is the number you want enter in this menu.

Owner’s Manual

System Setup

To enter settings for speaker crossover:

1.Press the MENU button on the front panel or the remote to display the Main Menu.

The Main Menu appears on-screen:

MAIN MENU

> INPUT

CONFIG

SPEAKER

SIZE

SPEAKER

X-OVER

SURROUND

CONFIG

CHANNEL

CALIBRATION

DELAY

ADJUST

SYSTEM

CONFIG

EXIT

 

2.Move the cursor to SPEAKER X-OVER by using the and buttons on the front panel or remote.

3.With the cursor pointing to SPEAKER X-OVER, press SET on the front panel or the remote.

The Speaker X-Over sub-menu appears:

speaker x-over

> front l/r

:100Hz

center

:100Hz

Surr

L/R

:100Hz

surr

back L/R

:100Hz

return to main menu

4.Use the and buttons on the front panel or remote to move to each line on this menu.

5.Press the and buttons on the front panel or remote to select the correct crossover setting for each speaker position.

When SMALL has been chosen as the “size” for a speaker position, the available choices are:

40Hz60Hz80Hz100Hz120Hz150Hz

NOTE: When LARGE is selected on the SPEAKER SIZE menu a full range signal will be sent to the speaker position being adjusted. When NONE is selected on the SPEAKER SIZE menu, no adjustment is needed or possible.

6.When you have completed the configuration process for all main speaker positions, use the and buttons on the front panel or remote to set the cursor to RETURN TO MAIN MENU.

7.Press SET on the front panel or the remote.

The Main Menu appears.

Model 970 7.1 Channel Preamplifier Processor

29

Page 28 Page 30
Page 29
Image 29
Outlaw Audio 970 owner manual Speaker X-Over Crossover Configuration, Select LB/RB when you have two Surround Back speakers
Page 28 Page 30

970 specifications

Outlaw Audio's Model 970 is a high-performing preamp processor designed to meet the growing demands of home theater enthusiasts and audiophiles alike. With a focus on delivering an exceptional audio experience, the 970 integrates advanced features, cutting-edge technologies, and a user-friendly interface.

One of the standout features of the Outlaw 970 is its support for high-resolution audio formats. This preamp processor is equipped to handle various formats, including Dolby TrueHD and DTS-HD Master Audio, which ensures that soundtracks are reproduced with stunning clarity and detail. The device supports both multichannel audio and two-channel stereo, making it versatile for different listening environments.

Equipped with 7.1-channel processing, the Outlaw 970 provides an immersive sound experience that gives users the feeling of being right in the middle of the action. Additionally, it features a robust set of audio controls that allow users to tailor their auditory experience. The processor includes adjustable bass management, enabling seamless integration with various subwoofers, and multiple listening modes to suit various content, from music to movies.

In terms of connectivity, the 970 does not disappoint. It offers an array of inputs and outputs, ensuring compatibility with modern audio and video components. It features multiple HDMI inputs, coaxial and optical digital inputs, as well as analog audio inputs, providing flexibility for connecting different devices. An essential highlight is its acclaimed video processing, which ensures that users can enjoy high-quality video playback, supporting resolutions up to 4K.

The Outlaw 970 also incorporates advanced technologies such as room correction software designed to optimize audio performance based on the acoustics of your listening space. This calibration feature significantly enhances the clarity and coherence of sound, making it ideal for those looking to achieve audio perfection within their home theater setups.

With a user-friendly interface, the Outlaw 970 allows for easy navigation and configuration. The device comes with an intuitive remote control that provides quick access to essential functions, while its front panel offers a straightforward layout for manual adjustments.

In conclusion, the Outlaw Audio Model 970 stands as a premium choice for those seeking a preamp processor that combines high-performance audio processing, robust connectivity, and intelligent calibration technologies. Its dedication to quality audio reproduction and user adaptability makes it a valuable addition to any home theater system.
Top Page Image Contents