Owner’s Manual

Model 970 Operation

To select a source/input from the front panel:

1.Press the INPUT button on the front panel.

2.Press the or buttons on the front panel to select the source.

The front-panel display will show the selected source (or the name you have chosen for it if you have renamed that input). The on-screen display will also show the selected source unless you have selected OSD: OFF in the Input Configuration menu.

Volume Control

Use this control to adjust the volume level.

To adjust main volume level:

nPress the VOLUME UP or DOWN buttons on the remote, or turn the VOLUME knob on the front panel.

The volume level will be indicated on the front-panel display and the on-screen display (unless you have selected OSD: OFF in the Input Configuration menu). The range of the volume control runs from -70dB to +10dB.

When you use the remote control to adjust the volume setting it will change up or down in 0.5 dB increments if you tap the volume controls up or down slowly. When you hold the volume control buttons down the volume will change quickly, but only in 1dB increments. When the front panel volume control is used the level is changed in 1dB increments.

Muting the Volume

Use this control to turn the sound off momentarily, such as when interrupted by a phone call.

To mute the main volume:

nPress the MUTE button on the front panel or the remote control.

The sound will mute and the word “MUTE” will replace the volume level in the displays and blink on the front-panel display, but remain constant in the on screen display.

To turn mute off:

nPress either MUTE button to restore the volume to its previous level.

The name of the selected source will reappear in the displays.

OR

nPress the VOLUME UP or DOWN buttons on the remote, or turn the VOLUME knob on the front panel.

The volume of the selected source will return at the new level.

Changing the Surround Mode

Use these controls to change the surround mode from the default selected during input configuration. Only the modes that can be used with the signal (stereo, Dolby Digital, or DTS) currently being played will be available for you to select. Seven-channel modes such as Dolby Pro Logic IIx Movie cannot be used unless you have seven speakers connected.

To change the surround mode from the front panel:

1.Press the SURR MODE button.

2.Press the or buttons on the front panel until the name of the desired mode appears.

The selected surround mode is shown on the front-panel display, and the on-screen display unless you selected OSD: OFF in the Input Con- figuration menu.

This method also allows you to select one of the Model 970’s stereo modes, including stereo, bypass, 5-channel stereo and 7-channel stereo.

To change the surround mode from the remote:

1.Press the DOLBY MODES button or the DTS MODES button, depending on what type of signal you are listening and the mode type desired until the name of the mode you want to select appears.

The selected surround mode will be shown on the front-panel display, and in the on-screen message (unless you selected OSD: OFF in the Input Configuration.). The DOLBY MODES button works with any type of sig- nal. The DTS MODES button works only when you are playing stereo or DTS material.

Changing Stereo Modes

The Model 970 offers several stereo listening models, including stereo, 5-channel stereo, and 7-channel stereo. With stereo material, such as CDs or FM radio, all of these modes are available. With Dolby Digital and DTS material, most of these modes will be not be available.

To change the stereo mode from the front panel:

1.Press the SURR MODE button.

2.Press the or buttons on the front panel until the name of the desired mode appears.

The selected surround mode will be shown on the front-panel display and in the on-screen messages (unless you selected OSD: OFF in the Input Configuration menu.)

To change the stereo mode from the remote:

nPress the STEREO button until the name of the desired name appears.

The selected stereo mode will be shown on the front-panel display and in the on-screen messages (unless you selected OSD: OFF in the Input Configuration menu.)

Selecting the Bypass Mode

The Model 970’s Bypass mode allows you to route the signal from an analog stereo input directly from the inputs to the volume control in a “straight-wire” mode, without any digital processing.

To select Bypass from the front panel:

1.Press the SURR MODE button.

2.Press the or buttons on the front panel until Bypass appears.

To select Bypass from the remote:

nPress the Bypass button to toggle between Bypass mode and standard mode with digital processing.

36

Outlaw Audio

Page 35 Page 37
Page 36
Image 36
Outlaw Audio 970 Use this control to adjust the volume level, Name of the selected source will reappear in the displays
Page 35 Page 37

970 specifications

Outlaw Audio's Model 970 is a high-performing preamp processor designed to meet the growing demands of home theater enthusiasts and audiophiles alike. With a focus on delivering an exceptional audio experience, the 970 integrates advanced features, cutting-edge technologies, and a user-friendly interface.

One of the standout features of the Outlaw 970 is its support for high-resolution audio formats. This preamp processor is equipped to handle various formats, including Dolby TrueHD and DTS-HD Master Audio, which ensures that soundtracks are reproduced with stunning clarity and detail. The device supports both multichannel audio and two-channel stereo, making it versatile for different listening environments.

Equipped with 7.1-channel processing, the Outlaw 970 provides an immersive sound experience that gives users the feeling of being right in the middle of the action. Additionally, it features a robust set of audio controls that allow users to tailor their auditory experience. The processor includes adjustable bass management, enabling seamless integration with various subwoofers, and multiple listening modes to suit various content, from music to movies.

In terms of connectivity, the 970 does not disappoint. It offers an array of inputs and outputs, ensuring compatibility with modern audio and video components. It features multiple HDMI inputs, coaxial and optical digital inputs, as well as analog audio inputs, providing flexibility for connecting different devices. An essential highlight is its acclaimed video processing, which ensures that users can enjoy high-quality video playback, supporting resolutions up to 4K.

The Outlaw 970 also incorporates advanced technologies such as room correction software designed to optimize audio performance based on the acoustics of your listening space. This calibration feature significantly enhances the clarity and coherence of sound, making it ideal for those looking to achieve audio perfection within their home theater setups.

With a user-friendly interface, the Outlaw 970 allows for easy navigation and configuration. The device comes with an intuitive remote control that provides quick access to essential functions, while its front panel offers a straightforward layout for manual adjustments.

In conclusion, the Outlaw Audio Model 970 stands as a premium choice for those seeking a preamp processor that combines high-performance audio processing, robust connectivity, and intelligent calibration technologies. Its dedication to quality audio reproduction and user adaptability makes it a valuable addition to any home theater system.
Top Page Image Contents