Outlaw Audio Model 970 Remote Control, These buttons control the Model 970’s volume

Owner’s Manual

Remote Control

Model 970 Remote Control

Remote Control

RC

1

RC

2

RC

3

RC

4

RC

5

RC

6

RC

7

RC

8

RC

9

RC

10

RC

11

RC

12

RC

13

RC

14

RC

15

RC

16

RC

17

RC

18

RC

19

RC

20

RC

21

RC

22

RC

23

RC

24

RC

25

RC

26

RC

27

RC

28

The Model 970’s hand held remote controller is a pre-programmed universal unit that contains an extensive library of IR codes and can control up to seven other system components in addition to duplicating every one of the Model 970’s front panel functions. All of these choices are shown on the Model 970’s front panel and on-screen displays.

Activate the remote’s backlight by simply touching any pushbutton. This lets you use the remote comfortably even in a dark room. The backlight stays on for 5 seconds after you’ve touched a pushbutton.

RC1 Setup button (see pages 40-42)

Holding down this button for three seconds causes the remote to enter setup mode. In this mode, you can enter an entire set of codes for another device to be controlled.

RC2 Device Control Selector buttons (see pages 24, 36, 40-42)

Selects the component you want to control with the remote. Push TNR

to control the Model 970.

RC3 Numeric keypad (see pages 38-42)

Buttons for control functions requiring you to enter numbers, such as command code selection when programming the remote, using the tuner, selecting CD and DVD player tracks, etc.

RC4 Mute button (see page 36)

Mutes the Model 970’s output. Pushing the button again restores the volume to its previous level. Changing the front panel or remote control volume setting also releases the mute function. Mute status is shown on the front panel display.

RC5 Volume Up/Down buttons (see pages 36, 40-42)

These buttons control the Model 970’s volume.

RC6 Sleep button (see page 37)

Activates the sleep timer, putting the processor into Standby mode after a certain period. The first push sets the timer at 90 minutes; subsequent pushes scroll though 75, 60, 45, 30, 20, 10, 5 minutes, and Off. Once the timer is set, pushing this button again displays the remaining time on both the front panel and the on-screen display.

RC7 Guide/Test dual function button (see page 37)

Model 970: Test turns on the test tone generator to set speaker levels. To route the test tone from one speaker to the next, press the Left or Right Cursor buttons. Use the Up/Down cursor buttons to adjust levels. Press Set when finished.

Other components: Guide calls up the program guide on satellite receiv- ers and cable boxes.

RC8 Cursor control buttons (menu navigation)

In general, the Up and Down cursor buttons select a particular function or parameter from the on-screen menu while the Left and Right cursor buttons adjust whatever function or parameter that’s been selected. Set activates selections made while using the on-screen menu.

RC9 Direct/ dual function button (see page 38)

Model 970: Direct enables access to a radio station directly. Press once, then enter the station’s frequency using the numeric keys.

Other components: begins the play function.

10

Outlaw Audio