4 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Turn on
1Press .
»The unit switches to the last selected source.
2Wait for automatic setup of wireless connection between the main unit and subwoofer.
»[PAIRING] (pairing) fl ashes.
»If the connection succeeds, [PAIR OK] (pair OK) is displayed and the blue indicator on the subwoofer lights up.
»If the connection fails, [PAIR FAIL] (pair fail) is displayed and the green indicator on the subwoofer lights up.
»If the wireless connection fails, set up the connection manually.
English
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•Risk of decreased battery life! Never mix different brands or types of batteries.
•Risk of product damage! When the remote control is not used for long periods, remove the batteries.
1
2 | 3 |
|
1Open the battery compartment.
2Insert two R03 or AAA batteries with correct polarity
3Close the battery compartment.
Set up wireless connection manually
1In Normal Standby mode (see “Adjust Settings - General Setup - [Standby Mode]”), press and hold on the main
unit for 3 seconds.
» [PAIRING] (pairing) fl ashes.
2Press and hold PAIR on the subwoofer for 3 seconds.
»The blue and green indicators on the subwoofer fl ash alternately.
»If wireless connection succeeds, [PAIR OK] (pair OK) is displayed and the blue indicators on the subwoofer lights up.
3Turn on the main unit again.
EN 17