AMX MVP-8400i manual Bsf, Bsm, Bso, Bsp, Bvl

Programming

"^" Button Commands (Cont.)

^BSF	Note: Select one button at a time (single variable text address). Do not assign a variable
Set the focus to	text address range to set focus to multiple buttons. Only one variable text address can be
	in focus at a time.
the text area.
	Syntax:
	"'^BSF-<vt addr range>,<selection value>'"
	Variable:
	variable text address range = 1 - 4000.
	selection value = Unselect = 0 and select = 1.
	Example:
	SEND_COMMAND Panel,"'^BSF-500,1'"
	Sets the focus to the text area of the button.
^BSM	This command causes the text areas to send their text as strings to the NetLinx Master.
Submit text for	Syntax:
text area buttons.	"'^BSM-<vt addr range>'"
	Variable:
	variable text address range = 1 - 4000.
	Example:
	SEND_COMMAND Panel,"'^BSM-500'"
	Submits the text of the text area button.
^BSO	If the sound name is blank the sound is then cleared. If the sound name is not matched,
Set the sound	the button sound is not changed.
	Syntax:
played when a
button is pressed.	"'^BSO-<vt addr range>,<button states range>,<sound name>'"
	Variable:
	variable text address range = 1 - 4000.
	button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
	1 = Off state and 2 = On state).
	sound name = (blank - sound cleared, not matched - button sound not changed).
	Example:
	SEND_COMMAND Panel,"'^BSO-500,1&2,music.wav'"
	Assigns the sound 'music.wav' to the button Off/On states.
^BSP	Set the button size and its position on the page.
Set the button	Syntax:
size and position.	"'^BSP-<vt addr range>,<left>,<top>,<right>,<bottom>'"
	Variable:
	variable text address range = 1 - 4000.
	left = left side of page.
	top = top of page.
	right = right side of page.
	bottom = bottom of page.
	Example:
	SEND_COMMAND Panel,"'^BSP-530,left,top'"
	Sets the button with variable text 530 in the left side top of page.
^BVL	Syntax:
Log-On/Log-Off	"'^BVL-<vt addr range>,<connection>'"
the computer	Variable:
control	variable text address range = 1 - 4000.
connection.
	connection = 0 (Log-Off connection) and 1 (Log-On connection).
	Example:
	SEND_COMMAND Panel,"'^BVL-500,0'"
	Logs-off the computer control connection of the button.

116 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom