AMX MVP-8400i manual Mps, Vks

Programming

Input Commands (Cont.)

^MBT	Syntax:
Set the mouse	"'^MBT-<0-3>'"
button mode for	Variable:
the virtual PC.	0 = None.
	1 = Left.
	2 = Middle.
	3 = Right.
	Example:
	SEND COMMAND Panel,"'^MBT-1'"
	Sets the mouse button mode for the virtual PC to LEFT.
^MDC	Syntax:
Set the mouse	"'^MDC'"
double click ON	Example:
for the virtual PC.	SEND COMMAND Panel,"'^MDC'"
	Enables the double click for the virtual PC.
^MPS	Note: This command causes all mice connected to the G4 product and any mice on a
Set mouse pass	computer connected via a VGA card with USB output to reset to position 0,0.
	Syntax:
through. Allows
mouse input to	"'^MPS-<0-6>,<0-6>,...'"
multiple	Variable:
destinations
	0 = Pass mouse input to G4 application.
simultaneously.
	1-4 = Pass mouse input data to a VGA card with USP output for redirection to a
Destinations are
	computer.
comma delimited.
	5 = Pass mouse buttons to the NetLinx master in the form of a custom event.
	6 = Pass mouse buttons and movement to the NetLinx master in the form of custom
	events.
	Example:
	SEND COMMAND Panel,"'^MPS-0'"
	Passes the mouse input to a connected G4 application.
^VKS	Key presses and key releases are not distinguished except in the case of CTRL, ALT, and
Send one or more	SHIFT.
virtual key strokes	Refer to theEmbedded Codes table on page 143 that define special characters which
to the G4	can be included with the string but may not be represented by the ASCII character set.
application.	Syntax:
	"'^VKS-<string>'"
	Variable:
	string = Only 1 string per command/only one stroke per command.
	Example:
	SEND COMMAND Panel,"'^VKS-'8"
	Sends out the keystroke 'backspace' to the G4 application.

142 MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom