Marantz BD7004 Menu Setting items Options Descriptions, Speaker Configuration, Channel Level

ENGLISH

Introduction Connections Playback Function Setup Others

Function Setup

To make the most of its feature, set up your speakers appropriately by referring to the table below. Speaker setting options are available at the following locations;

<Speaker setting for the audio signal output from the HDMI OUT jack > (Available when you have HDMI cable connected to the HDMI OUT jack) SETUP A Quick A HDMI Audio Out AHDMI Multi(LPCM)

SETUP A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)

<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks > SETUP A Quick A 7.1ch Audio Out A Multi Channel

SETUP A Custom A Audio A 7.1ch Audio Out A Multi Channel

How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting

1)Use [U / V] to select the menu item.

2)Use [U / V] to select setting items.

•Use [RETURN] to go back to the previous screen.

3)Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)

For “Test Tone”:

Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].

•The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use [Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker that output the test tone.

•If you want to stop the test tone, press [RETURN].

For “Default”:

Press [ENTER] to reset the “Speaker Configuration”, “Channel Level” or “Delay Time” setting to the default.

4)Press [SETUP] to exit.

Menu	Setting items	Options	Descriptions
Speaker Configuration	Front	Large*	Large:
Select the desired			For the large speakers
		Small
speaker to set. Then			with strong low frequency
	Center	Large*
change the setting			reproduction capabilities.
appropriately by		Small/None	Small:
referring to the			For the small speakers
	Subwoofer	On*
descriptions.			which do not provide
		None
			strong bass sound.
	Surround	Large*	None:
			No speakers.
		Small/None
			For “Subwoofer” there is
	Surround Back	Large*
			only “On” or “None”.
		Small/None
	Default		Select “Default”, then
			press [ENTER] to reset the
			“Speaker Configuration”
			setting to the default.

Function Setup

•For “Speaker Configuration” setting, the settings of each speaker size may be adjusted automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround” and “Surround Back” to “Large”.)

•If you connect to 5.1-channel surround system, set “Surround Back” in “Speaker Configuration” to “None”.

•“None” for “Center”, “Subwoofer”, “Surround” and “Surround Back” is not available for the speaker setting for the audio signal output from the HDMI OUT jack .

Menu	Setting items	Options	Descriptions
Channel Level	Test Tone:	Off*	Select “Off” to deactivate
Tests or sets the	“Test Tone” is the test		the “Test Tone” feature.
volume for each	tone which can be		Select “Manual”, then
speaker.	output from the		press [ENTER] to manually
		Manual
	speakers so that you		set the volume for the
	can adjust the volume		desired speaker.
	for each speaker.		Select “Auto”,then press
		Auto
			[ENTER] to automatically
			output the test tone from
			each speaker.
	Front Lch	0 dB to -12 dB	If you have selected
		(0 dB*)	“Manual” in “Test Tone”,
			select the desired speaker
	Center	0 dB to -12 dB
			to set and adjust the
		(0 dB*)
			volume for the selected
	Front Rch	0 dB to -12 dB
			speaker.
		(0 dB*)
			If you have selected
	Surround Rch	0 dB to -12 dB
			“Auto” in “Test Tone”, test
		(0 dB*)	tone will be output
	Surround Back Rch	0 dB to -12 dB	automatically in order.
		(0 dB*)	Adjust the volume of the
			speaker that output the
	Surround Back Lch	0 dB to -12 dB
			test tone.
		(0 dB*)
	Surround Lch	0 dB to -12 dB
		(0 dB*)
	Subwoofer	0 dB to -12 dB
		(0 dB*)
	Default		Select “Default”, then
			press [ENTER] to reset the
			“Channel Level” setting to
			the default.

Remote control operation	: Displaying the menu	: Move the cursor	: Confirm the setting	: Return to previous menu
buttons	Cancel the menu	(Up/Down/Left/Right)

35

ENGLISH