Marantz BD7004 manual Connecting to a TV, Others, Rca, This unit

Connections

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing device.

					Method 1	Method 2
			analog audio		standard picture	better picture
		display device
			AUDIO IN		VIDEO	COMPONENT
			R	L		VIDEO IN
					IN
						Y
						(Green)
						PB/CB
						(Blue)
			RCA			PR/CR
					RCA video	(Red)
			audio
					cable	component video
			cable	and
					or	cable
	this unit
			2ch AUDIO OUT			(Red) (Blue)	(Green)
N	OUT
FLASHER
			R	L	VIDEO OUT
		FL C SL	SBL
GHT		2ch AUDIO OUT				COMPONENT VIDEO OUT
BLE		R L
RS-232C
		FR SW SR	SBR
		7.1ch AUDIO OUT
						PR/CR PB/CB	Y
		2ch AUDIO OUT			VIDEO OUT	COMPONENT VIDEO OUT

Supplied cables used in this connection are as follows:

•RCA audio cable (L/R) x 1

•RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Note

•Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•If the display device to which the player is to be connected is compatible with progressive scan video, connect to the component video input.

•This unit’s COMPONENT VIDEO OUT jacks are compatible for 480i/480p/720p/1080i video resolution. If the connected display device is not compatible for 480p/720p/1080i video resolution, set “Component Output” to “480i”.

•If the picture is not output properly to the display device because of the “HDMI Video Resolution” or “Component Output” setting, press and hold B on the front panel for more than 5 seconds. The “HDMI Video Resolution” setting will be reset to the default automatically.

•If you are using HDMI connection and set “HDMI Video Resolution” to “Source Direct”, “1080p” or “1080p24”, picture may not be output properly to the display device. In that case, set “HDMI Video Resolution” to “480i”, “480p”, “720p” or “1080i”.

ENGLISH

Connections

Connecting to a Display Device with HDMI Cable			Introduction
Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
After making the connection, please make HDMI settings on setup menu according to your display
device. Refer to pages 31-33.	this unit
Method 3
	AC IN	DIGITAL OUT COMPONENT VID
best audio and picture		COAXIAL	Connections
	HDMI cable
	NETWORK	HDMI OUT
display device
A display device
with an HDMI
compatible port
	To HDMI Input jack

Cables not included.

Please purchase the necessary cables at your local store.

is indicated (a non-HDMI-certified product).			Playback
Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the
HDMI connector.
Normal playback may not be possible when using a cable other than one on which the HDMI logo
Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable			Function
Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables
enables digital surround sound with high quality video.
Front Speaker (left)	Center	Front Speaker (right)
	Speaker		Setup
display device	amplifier	this unit
HDMI IN HDMI OUT		HDMI IN
HDMI cable		HDMI cable	Others
		Subwoofer
Surround	Surround
back (For	back (For
7.1-channel) 7.1-channel)
(left)	(right)
Surround Speaker (left)		Surround Speaker (right)

Cables not included.

Please purchase the necessary cables at your local store.

12

ENGLISH