To set up a static IP address

1From the Home screen, tap .

2Find and tap Settings > Wireless & networks > Wi-Fi settings.

3Press .

4Tap Advanced .

5Mark the Use static IP checkbox.

6Tap and enter the information needed for your Wi-Fi® network:

•IP address

•Gateway

•Netmask

•DNS 1

•DNS 2

7Press and tap Save .

Connected devices

Share media files in your phone with other devices over a shared Wi-Fi® connection. When your phone is connected to your home network via Wi-Fi® and has the Connected devices function turned on, other client devices connected to the same home network can access media files saved on your phone. For example, you can view photos or play a music track on a connected client device. A connected client device can be, for example, a computer with client software, a camera, TV, or a PlayStation®3. All devices must be DLNA™ (Digital Living Network Alliance) certified.

To use the Connected devices function

1Connect your phone to a Wi-Fi® network.

2From your Home screen, tap , then find and tap Connected devices.

3Tap beside Change server name and edit your phone name if needed. This name will later appear on other client device(s) connected to the Wi-Fi network, to identify your phone.

4Mark the Share contents checkbox. appears in the status bar. Your phone can now work as a media server.

5Connect your computer or other client devices to the same Wi-Fi® network.

6Activate client software installed on your computer. Find and select your phone as the server.

7A notification appears in the status bar of the phone. Tap it and set access permissions.

8Transfer to and show your phone content on client devices. It may take a couple of minutes to show all the content on the client devices if many photo or music files are saved on the phone.

9To close the Connected devices view, press . The Connected devices function stays running in the background.

10To disconnect from the server, go to the Connected devices view in the phone and unmark the Share contents checkbox.

A client device for which you have already set access permissions is a registered client device and is displayed in the Registered devices list. A client device that is waiting for you to grant access permissions is displayed in the Pending devices list.

The instructions described above may differ depending on the client devices. Also refer to your client device User guide. If the device cannot connect, check that your home network is working.

To set access permissions for a pending client device

1From your Home screen, tap , then find and tap Connected devices.

2Select a client device from the Pending devices list.

3Select an access permission level.

To change the name of a registered client device

1From your Home screen, tap , then find and tap Connected devices.

2Select a client device from the Registered devices list, then select Change name.

3Enter a new name for the client device.

67

This is an Internet version of this publication. © Print only for private use.