To turn on smile detection

1From your Home screen, tap , then find and tap .

2If the still camera is not selected, tap .

3To display all settings, press .

4Tap Capturing mode > Smile detection.

5Tap Smile level and select a setting.

To take a photo using smile detection

1When the camera is open and Smile detection is set, point the camera at your subject. Each detected face is framed (not more than five faces). The camera selects which face to focus on. A green frame shows the face in focus.

2The camera automatically takes the photo when the subject in focus smiles.

3If no smile is detected, press the camera key fully down to take the photo.

Adding the geographical position to your photos

Turn on geotagging to add the approximate geographical location (a geotag) to photos when you take them. The geographical location is determined either by wireless networks (mobile or Wi-Fi® networks) or GPS technology.

When appears on the camera screen, geotagging is turned on but the geographical position has not been found. When appears, geotagging is turned on and the

geographical location is available, so your photo can get geotagged. When neither of these two symbols appears, geotagging is turned off.

To turn on geotagging

1From your Home screen, tap , then find and tap .

2Press , then tap Geotagging.

3Tap On.

4Tap OK to agree to enable GPS and/or wireless networks.

5Check the options you want to select under My Location.

6After you confirm your settings, press to return to the camera screen.

7Make sure your location has been found. When appears on the camera screen, your location is available and your photo can get geotagged.

Using still camera settings

To select still camera settings

1From your Home screen, tap , then find and tap .

2If the still camera is not selected, tap .

3To display all settings, press .

4Tap the setting you want to select.

To customise the still camera settings panel

1When the camera is open, press to display all settings.

2Touch and hold the setting you want to move and drag it to the desired position.

If you drag the setting outside of the settings panel, the change is cancelled.

Still camera settings overview

Capturing mode

Select the way you take a photo

Normal

Scene recognition

The camera determines which scene is most suitable. A scene icon and text appears when the scene is selected.

83

This is an Internet version of this publication. © Print only for private use.