Quick-Use Guide
There are several ways to connect your new LCD TV Monitor to your other equipment. This
Cable TV signal from the Cable Company
| 1 2 |
|
| OUTPUT | |
|
| CH |
CABLE | 3 | 4 |
TO TV |
| |
IN |
|
|
75Ω | 3 | |
Coaxial | ||
Cable | ||
| ||
| TV |
TV
VIDEO
75Ω jack on rear
of Television
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to the LCD TV Monitor. The sound from the Cable Box will be monaural
1
2
3
Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box.
Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the Cable Box.
Connect the other end of the coaxial cable to the TV jack on the LCD TV Monitor.
Screw it down finger tight.
Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3 or 4. Set the TV to
4 the same channel. When watching TV programming, change channels at the Cable Box, not the LCD TV Monitor.
NOTE: To see how to make other connections, please refer to the Owner’s